For updating the firmware of the module, one needs:
- Intel - Quartus prime Lite Edition - Version 18.1
- Arrow-USB-Blaster-Setup-2.2.exe (Install drivers if not done)
- the firmware, a *.pof file as part of the compressed demo folder
Quartus prime and Arrow-USB-Blaster need to be installed prior to updating the firmware.
In addition, the compressed folder needs to be extracted.
To update the firmware, open Quartus prime and press "Hardware Setup...". A new window opens.
TExxxx block diagram
draw.io
In it press right next to "Currently selected hardware" and select "Arrow-USB-Blaster [USBX]",
whereby the "X" in [USBX] is a placeholder.
Create DrawIO object here: Attention if you copy from other page, objects are only linked.
TExxxx block diagram
draw.io
Then, press "Close" and return to the previous window.
draw.io
Now the hardware is selected and through pressing "Add File" the downloaded *.pof firmware file can be selected.
The window layout changes slightly.
draw.io
Mark the "Program/Configure" box for the selected file. The programming of the FPGA is executed, when you press the button "Start".
When the programming finishes, the Quartus Prime Programmer can be closed.
Overview
Content Tools