Legend:
: Attention: Carrier/Module combination only with special condition or PCB modification possible
: Supported
: Supported with limitations
: Not Supported
: Table currently not complete, see TRM of module and carrier
TE0701
FMC(1) | FMC Vadj | PMODS | ETH | HDMI | CL Connector | SD Card | USB Host | VBATT | |
---|---|---|---|---|---|---|---|---|---|
TE0710 | |||||||||
TE0711 | |||||||||
TE0712 | MGT's | ||||||||
TE0713 | |||||||||
TE0715-15 | MGT's | ||||||||
TE0715-30 | MGT's | ||||||||
TE0720 | LVDS | ||||||||
TE0741 | MGT's | ||||||||
TE0820 | |||||||||
TE0841 | MGT's |
- (1) FMC is a LPC Connector (no gigabit transceivers) on TE0701: I2C and JTAG access over CPLD.
Separate TE0701_FMC_PINOUT table (PDF/XLSX) is available on: Trenz_Electronic Download-Pinout - (2) HP IO Banks only support 1.8V
- (3) MGT's Lanes goes to SD-Level shifter, it's recommended to desoldering level shifter
- (4) MGT's Lanes goes to SD-Level shifter, but module side 1.8V is not connected
CL Connector is usable as Cameralink only with module that map LVDS pins to this connector
TE0703
ETH | SD Card | USB Host | Reset | User LEDs | USB UART | USB JTAG | |
---|---|---|---|---|---|---|---|
TE0710 | |||||||
TE0711 | |||||||
TE0712 | |||||||
TE0713 | |||||||
TE0715-15 | |||||||
TE0715-30 | |||||||
TE0720 | |||||||
TE0741 | |||||||
TE0820 | |||||||
TE0841 |
- (2) HP IO Banks only support 1.8V
- (3) MGT's Lanes goes to SD-Level shifter, it's recommended to desoldering level shifter
- (4) MGT's Lanes goes to SD-Level shifter, but module side 1.8V is not connected
TE0705
PMODS | ETH | SD Card | USB Host | |
---|---|---|---|---|
TE0710 | ||||
TE0711 | ||||
TE0712 | 100 MBit | |||
TE0713 | ||||
TE0715-15 | ||||
TE0715-30 | ||||
TE0720 | ||||
TE0741 | ||||
TE0820 | ||||
TE0841 |
- (2) HP IO Banks only support 1.8V
- (3) MGT's Lanes goes to SD-Level shifter, it's recommended to desoldering level shifter
- (4) MGT's Lanes goes to SD-Level shifter, but module side 1.8V is not connected
TE0706
ETH1 | ETH2 | SD Card | USB Host | |
---|---|---|---|---|
TE0710 | ||||
TE0711 | ||||
TE0712 | 100 MBit | |||
TE0713 | ||||
TE0715-15 | ||||
TE0715-30 | ||||
TE0720 | ||||
TE0741 | ||||
TE0820 | ||||
TE0841 |
- (2) HP IO Banks only support 1.8V
- (3) MGT's Lanes goes to SD-Level shifter, it's recommended to desoldering level shifter
- (4) MGT's Lanes goes to SD-Level shifter, but module side 1.8V is not connected
TEBA0841
Overview
Content Tools