E0630 series modules have been designed to be mechanically and (as far as possible) electrically backward compatible with TE0300 series modules.
Designs based on a TE0300 module can be ported to a TE0600 module as described below.
TE0630 series modules are mechanically equivalent to the TE0300 series modules:
Designs based on a TE0300 module can be ported to a TE0600 module without any mechanical redesign.
TE0300 and TE0630 series modules have similar power supply requirements. Chances are that designs based on a TE0300 module can be ported to a TE0600 module without any power supply redesign.
Power supply pins and ground pins of TE0300 series modules match those of TE0630 series modules. Designs based on a TE0300 module can be ported to a TE0600 module without any power supply pin and ground pin redesign.
Most user signal pins of TE0300 series modules match their corresponding pins on TE0630 series modules. Designs based on a TE0300 module can be ported to a TE0600 module without any redesign for those pins.
User signal pins of TE0300 series modules NOT matching their corresponding pins on TE0630 series modules are listed in the following table. Designs based on a TE0300 module using the user signal pins listed in the following table can be ported to a TE0600 module by adapting the project to the type (SIO, DIO, CIO) and polarity (_P. _N) change of the corresponding signal pins.
Connector:Pin | TE0300 | TE0300 type | TE0630 pin name | TE0630 type |
---|---|---|---|---|
J4:5 | B3_L01_P | DIO | V3_IO_01 | SIO |
J4:7 | B3_L01_N | DIO | V3_IO_02 | SIO |
J4:9 | B3_L02_P | DIO | V3_IO_03 | SIO |
J4:11 | B3_L02_N | DIO | V3_IO_04 | SIO |
J4:17 | B0_L24_N | DIO | V0_IO_01 | SIO |
J4:19 | B0_L24_P | DIO | V0_IO_01_N | DIO |
J4:6 | B3_L07_P | DIO | V3_IO_06 | SIO |
J4:8 | B3_L07_N | DIO | V3_IO_07 | SIO |
J4:10 | B3_L03_N | DIO | V3_IO_08 | SIO |
J4:12 | B3_L03_P | DIO | V3_IO_09 | SIO |
J5:13 | B3_L22_P | DIO | V3_IO_12 | SIO |
J5:15 | B3_L22_N | DIO | V3_IO_13 | SIO |
J5:19 | B3_L20_P | DIO | V3_IO_14 | SIO |
J5:21 | B3_L20_N | DIO | V3_IO_15 | SIO |
J5:16 | B3_L21_N | DIO | V3_IO_17 | SIO |
J5:18 | B3_L21_P | DIO | V3_IO_18 | SIO |
J5:20 | B3_L23_N | DIO | V3_IO_19 | SIO |
J5:22 | B3_L23_P | DIO | V3_IO_20 | SIO |
J5:32 | B2_L06_P | DIO | V3_IO_24 | SIO |
J5:34 | B2_L06_N | DIO | V3_IO_25 | SIO |
J5:41 | B2_GCLK13 | CIO | V2_IO_02 | SIO |
J5:49 | B2_GCLK_L13_N | CIO | V2_IO_24_P | DIO |
J5:51 | B2_GCLK_L13_P | CIO | V2_IO_24_N | DIO |
Type | Description |
---|---|
DIO | Unrestricted, general-purpose differential user-I/O pin. |
SIO | Unrestricted, general-purpose (single-ended) user-I/O pin. |
CIO | Unrestricted, general-purpose differential user-I/O pin. This pin also can be used as FPGA clock input. |
See Table 17 for pin types definitions.
Type | Description |
---|---|
DIO | Unrestricted, general-purpose differential user-I/O pin. |
SIO | Unrestricted, general-purpose (single-ended) user-I/O pin. |
CIO | Unrestricted, general-purpose differential user-I/O pin. This pin also can be used as FPGA clock input. |
Table 17: TE0300 and TE0630 pin types
Most user signals to B2B connectors routed from same FPGA banks. Differences shown in Table 18.
Connector:Pin | TE0300 Bank | TE0630 Bank |
---|---|---|
J4:15 | 0 | 3 |
J4:36 | 0 | 3 |
J4:52 | 0 | 3 |
J5:33 | 2 | 3 |
J5:28 | 2 | 3 |
J5:30 | 2 | 3 |
J5:32 | 2 | 3 |
J5:34 | 2 | 3 |
J5:38 | 2 | 3 |
J5:40 | 3 | 2 |
J5:42 | 3 | 2 |
J5:50 | 3 | 2 |
J5:52 | 3 | 2 |
Connector:Pin | TE0300 Bank | TE0630 Bank |
---|---|---|
J4:15 | 0 | 3 |
J4:36 | 0 | 3 |
J4:52 | 0 | 3 |
J5:33 | 2 | 3 |
J5:28 | 2 | 3 |
J5:30 | 2 | 3 |
J5:32 | 2 | 3 |
J5:34 | 2 | 3 |
J5:38 | 2 | 3 |
J5:40 | 3 | 2 |
J5:42 | 3 | 2 |
J5:50 | 3 | 2 |
J5:52 | 3 | 2 |
Table 18: TE0300 and TE0630 user signals I/O banks differences.
I/O Banks power supply for both modules shown in Table 19.
Bank | TE0300 | TE0630 |
---|---|---|
B0 | VCCIO (1.2 V - 3.3 V) | VCCIO (1.2 V - 3.3 V) |
B1 | 2.5 V | 1.5 V |
B2 | 3.3 V | 3.3 V |
B3 | 3.3 V | 3.3 V |
Table 19:
Bank | TE0300 | TE0630 |
---|---|---|
B0 | VCCIO (1.2 V - 3.3 V) | VCCIO (1.2 V - 3.3 V) |
B1 | 2.5 V | 1.5 V |
B2 | 3.3 V | 3.3 V |
B3 | 3.3 V | 3.3 V |
Bank 0 I/O supply voltage at both modules can be configured by user, see chapter On-board Power Rails.