You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 5 Next »

The TE0300 has three on-board memories:

  • DDR SDRAM (parallel)
    TE0320 modules have two 512Mb DDR SDRAM components each with a 16-bit data-bus connected in parallel to FPGA bank 3 as a virtual 512Mb DDR SDRAM component with a 32-bit data-bus. Memory available in industrial and commercial temperature grade.
  • SPI Flash (serial)
    TE0320 has an STMicroelectronics M25P32/64/128 (32/64/128-Mbit), low voltage, serial Flash memory with 75 MHz SPI bus interface for configuration and operating storage accessible through USB or SPI. Default module configuration contain 32 Mbit Flash chip M25P32, others available by request.
  • EEPROM (serial)
    TE0300 modules have a Micron Technology 24LC128 128 kbit I2C CMOS Serial EEPROM for EZ-USB FX2 firmware, vendor ID and device ID storage accessible through the EZ-USB FX2 microcontroller.
  • No labels