Switches (settings for USB Firmware, FPGA bitstream programming, Power Supply and reset)

Organized by modules

TE0300 is provided with the following slide switches

• S1: 1 x slide switch (system)
• S2: 1 x slide switch (system)
• S3: 1 x slide switch (system)
• S4: 1 x slide switch (system)

TE0320 is provided with the following slide switches:

• S1: 4 x DIP slide switches (system)
• S2: 1 x slide switch (system)
• S5: 8 × DIP slide switches (user)

TE0630 is provided with the following slide switches:

• S1: 4 x DIP slide switches (system/user)
  • S1[A:B] : 2 x DIP slide switches (system)
  • S1[C:D]: 2 x DIP slide switches (user)

Organized by types

EEPROM switch (EEPROM enabled: connection between EEPROM and USB FX2 microcontroller):

• TE0300: S1
• TE0320: S1A
• TE0630: S1A

Power Rails Configuration:

• TE0300: S3
• TE0320: S2
• TE0630: S1B

Master Reset (aka Reset Line):

• TE0300: S2
• TE0320: S1D
• TE0630: it doesn't exist as a switch but only as a button.

FPGA Configuration selection (SPI+Jtag or only JTAG)

Mode Pins:

• TE0300: they doesn't exist as switches.
• TE0320: S1[B:C]
• TE0630: they doesn't exist as switches.