Two clock oscillators are installed on the TE0630.
Clock oscillator U10 generates a 24 MHz clock signal for the FPGA and the USB controller. This clock signal is used for synchronous communication between FPGA and USB controller.
Clock oscillator U11 generates a 100 MHzOscillator frequency can be changed by user request. Contact Trenz Electronic for details. clock signal used as a main system clock in FPGA designs. See Table 8 for pin-out information.
Signal |
Frequency |
FPGA pin |
---|---|---|
24MHZ1 |
24 MHz |
G3 |
SYSCLK |
100 MHz |
AA12 |
Table 8: Clock signals pin-out