You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 22 Next »

When Xilinx SDK open, you should:

1) Set the repositories for device driver of custom block used in SDK Microblaze project

2) Create an Hardware Platform Specification Project

3) Create a Board Support Package Project

4)(Re)Create the "Application Project" demo

  • You should click "File" >"New" > "Project"
  • a pop up "New Project" will appears
  • click "Xilinx" > "Application Project", then next
  • a new pop up "New Project Application Project" will appear;
  • you should set the value of parameters as in the image below
ApplicationProject demo creation
  • after this clik "Finish"
  • a new pop-up will appears "New Project Templates"
Available Templates
  • in this case select "Empty Apllication" under "Available Templates"
  • click "Finish"
  • a new "Application Project" named "demo" will be created in the "Project Explorer"
  • now you should click the "demo" folder in "Project Explorer" and select "Project References";  ?????????????????????????????????????????????
  • now you should assure that "reference-TE0300_hw_platform" and "standalon_bsp_0" are both checked; if their box are not already checked, you should check them now;
Project References checking
  • now the contents of "Project Explorer" should be this one below
Application Project "demo", BSP and reference hardware checked
  • now you should copy the contents of the original demo (all .c and .h files from "TE0xxx-Reference-Designs\reference-TE0xxx\SDK\SDK_Workspace\demo\src" already moved in the temporary folder "C:\demo_src_TE") inside the folder "C:\XilinxProject\reference-TE0xxx\SDK\SDK_Workspace\demo\scr" as already do in the figure above;
Application Project "demo" created and original .c and .h file are moved inside src subfolder
  • now you should select "src" folder in "Project Explorer" > "demo", right click and select "Refresh"; in this way the .h and .c files will appears under the "src" folder of "Project Explorer"
  • now you should select "demo" folder in "Project Explorer", right click and select "Refresh";
Refresh the Application Project "demo"
  • now you should select (left click) "demo" folder in "Project Explorer";
Select "demo" project
  • now you should click "Xilinx Tools" and then click "Generate linker script";
Generate linker script for application project "demo"
  • a pop-up "Generate a linker script" will appears; click "Generate";

  • the pop-up will close and "lscript.ld" file will be (re)written in "src" subfolder of "demo"
  • after this, you should wait that building (compile and linking) procedure ends ("Finished Building: demo.elf.elfcheck" in Console C-build [demo])

5) Download the bitstream and the elf file.

  • No labels