You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 4 Next »

You should click "File" >"New" > "Project".

A pop up "New Project" will appear.

Click "Xilinx" > "Application Project".

A new pop up "New Project Application Project" will appear.

You should set the value of parameters as in the image below.

ApplicationProject demo creation

After this clik "Finish".

A new pop-up "New Project Templates" will appear.

Available Templates

In this case select "Empty Apllication" under "Available Templates".

Click "Finish".

A new "Application Project" named "demo" will be created in the "Project Explorer".

Now you should click "Project" > "Properties". A pop-up "Properties for demo" will appear. Now you should select "Project References".

Now you should assure that "reference-TE0300_hw_platform" and "standalon_bsp_0" are both checked; if their box are not already checked, you should check them now;

Project References checking

Now the contents of "Project Explorer" should be this one below.

Application Project "demo", BSP and reference hardware checked

Now you should copy the contents of the original demo (all .c and .h files from "TE0xxx-Reference-Designs\reference-TE0xxx\SDK\SDK_Workspace\demo\src" already moved in the temporary folder "C:\demo_src_TE") inside the folder "C:\XilinxProject\reference-TE0xxx\SDK\SDK_Workspace\demo\scr" as already do in the figure below.

Application Project "demo" created and original .c and .h file are moved inside src subfolder
  • You should select "src" folder in "Project Explorer" > "demo", right click and select "Refresh"; in this way the .h and .c files will appears under the "src" folder of "Project Explorer".
  • You should select "demo" folder in "Project Explorer", right click and select "Refresh".
Refresh the Application Project "demo"

You should select (left click) "demo" folder in "Project Explorer".

Select "demo" project

You should click "Xilinx Tools" and then click "Generate linker script".

Generate linker script for application project "demo"

A pop-up "Generate a linker script" will appear; you should click "Generate";

Generate a linker script

The pop-up will close and "lscript.ld" file will be (re)written in "src" subfolder of "demo".

After this, you should wait that building (compile and linking) procedure ends; "Finished Building: demo.elf.elfcheck" should appear in Console C-build [demo].

  • No labels