You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 8 Next »

You should click "Start">"Xilinx Design Tools">"ISE Design Suite xx.x">"EDK">"Xilinx Softwate Development".

After this a pop-up will appear.

Select a workspace

In this pop-up you should choose the SDK_Workspace desired.

Workspace selected, SDK is loading

After this the SDK will starts.

Xilinx SDK starts

If the version of the SDK is higher than the version of the project opened you should follow the instruction and refresh the demo .c and .h files.

Refresh .c and .h files of demo

After refresh operation this message should appear.

End of the refresh operation

After this, even if refresh operation appears correct and no errors are reported, you should check the SDK Workspace references to TE EDK IP core drivers.

To open the SDK workspace reference repositories you should click "Xilinx Tools" > "Repositories".

Open Xilinx SDK Workspace repositories

A new pop-up windows will appear. You should remove the wrong reference clicking/selecting "B:\GIT\TE03XX-Reference-Designs\TE-EDK-IP" and clicking "Remove" button.

Preference pop-up, repositories selected

You should add the correct reference to TE EDK IP cores drivers.

Click the "New..." button and a pop-up "Select folder" will appear.

You should select the desired folder.

You should not alter folder nesting or select MyProcessorIPLib because double nesting of folders is a Xilinx XPS and SDK requirements.

Then click "OK".

You should check the "Application Project" "demo" references.

You should check the "Board Support Package Project" references.

Change rs232 to debug_module

You should generate a new link script.

STDIO connection of RUN and DEBUG: JTAG UART

 

  • No labels