You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 8 Next »

Double click set_0xxx_project.bat to select the corresponding FPGA mounted on TE module.

Double click the system.xmp in "C:\XilinxProject\reference-TE0xxx".

The Xilinx Platform Studio should open.

You should click "Project" and then click "Project Options".

XPS: Project>Project Options

Under "Advanced Options (Optional) > Project Peripheral Repository Search Path" you must write (if it is not already written) "..TE-EDK-IP\".

Project Peripheral Repository Search Path: "..TE-EDK-IP\"
You should not alter folder nesting or select MyProcessorIPLib because double nesting of folders is a Xilinx Platform Studio requirements.

After this selection the XPS should appear like in this image.

XPS project to start

Now, you can cancel (or move in another folder) the content of TE0xxx-Reference-Designs\reference-TE0xxx\SDK\SDK_Export.

You can copy all .c and .h files from TE0xxx-Reference-Designs\reference-TE0xxx\SDK\SDK_Workspace\demo\src in a temporary folder (C:\demo_src_TE for example).

You can cancel all files and folders from TE0xxx-Reference-Designs\reference-TE0xxx\SDK\SDK_Workspace.

(1)xxx is 

  • 300 for TE0300 project: unfortunately they are in the same folder TE03xx
  • 320 for TE0320 project: unfortunately they are in the same folder TE03xx
  • 630 for TE0630 project
  • No labels