If the TE0300 module is used, the S2 switch must be turned on (RUN).
If the TE0320 module is used, the S1D switch must be turned on (RUN).
Is DEWESoft Trenz Electronic TE03xx USB already installed? | Image of Windows "Device Manager" |
---|---|
Is Trenz Electronic USB FX2 already installed? | Image of Windows "Device Manager" |
---|---|
host operating system (Microsoft Windows ) | device driver folder | automatic/online installation/update |
---|---|---|
2000, 32 bit | MS-Windows-2000\x86 | not available |
XP, 32 bit | MS-Windows-XP\x86 | not available |
XP, 64 bit | MS-Windows-XP\x64 | not available |
Vista, 32 bit | MS-Windows-Vista+7\x86 | not available |
Vista, 64 bit | MS-Windows-Vista+7\x64 | not available |
7, 32 bit | MS-Windows-Vista+7\x86 | available |
7, 64 bit | MS-Windows-Vista+7\x64 | available |
8, 32 bit | MS-Windows-Vista+7\x86 | available |
8, 64 bit | MS-Windows-Vista+7\x64 | available |
(1) Refer to your module manual for switch location.
Now, Cypress firmware update tools (Cypress USB Console recovery boot,Cypress USB Control Center recovery boot) and OpenFutNet (OpenFutNet recovery boot) can read and write the EEPROM.
Now, the user can use TE API Commands and TE API libraries,