You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 8 Next »

Download PDF version of this document.

CompanyTrenz Electronic GmbH
PCN NumberPCN-20200806
TitleTE0724-03 to TE0724-04 Hardware Revision Change
SubjectHardware Revision Change
Issue Date

2020-09-02

Products Affected

This change affects all Trenz Electronic TE0724 SoMs of revision 03: TE0724-03-*.

Affected Product

Replacement
TE0724-03-*TE0724-04-*

Changes

#1 Replaced I2C pullups by 2K (R20 and R21)

Type: BOM change

Reason: Pullups too weak in similar configurations.

Impact: None.

#2 Connected WP (pin 7) of EEPROM (U10)  via R79 GND, added not fitted R72 to 1.8V rail.

Type: Schematic change

Reason: EEPROM was constantly write protected or had to be patched.

Impact: EEPORM is not write protected, no patch needed. For enabling write protection R72 can be assembled instead of R79.

#3 Changed C7, C8, C21, C47, C74, C91 from X5R to X7S

Type: BOM change

Reason: This parts were identified as critical for very high ambient temperatures.

Impact: None. Parts are specified for up to 125°C and therefore the module can cope better with higher ambient temperatures.

#4 Moved following components away from FPGA: C28, C29, C77, C80, R2, R12, R18, R43, R47, R51, R54, R57, R62, L8, L9.

Type: PCB change

Reason: Request for usage of BGA cooler with clip on mounting frame.

Impact: BGA cooler can now be used without any interferring components. No other impact, all Routing length have been perserved.

#5 Set S/N to not fitted.

Type: BOM change

Reason: Part is end of life.

Impact: Track it pad no more available.

#6 Added legal notices to Schematic

Type: Documentation change

Reason: Increase awarness of legal usage.

Impact: None.

#7 Full update from Library

Type: PCB change

Reason: Improve production yield.

Impact: None.

Method of Identification

The revision number is printed on both sides of the PCB.

Production Shipment Schedule

The new revison 04 is available from January 2020, after old Stock is gone. If you still need revision 03 please contact us.


Contact Information

If you have any questions related to this PCN, please contact Trenz Electronics Technical Support at

Disclaimer

Any projected dates in this PCN are based on the most current product information at the time this PCN is being issued, but they may change due to unforeseen circumstances.  For the latest schedule and any other information, please contact your local Trenz Electronic sales office, technical support or local distributor.

This PCN follows JEDEC Standard J-STD-046.


  • No labels