This is a minimal MicroBlaze based system that can boot Linux and is fully ready for integration into Xilinx Petalinux. This design will be provided for all Module that can support it (except ZYNQ based ones).
List of supported modules
- TE0710
- TE0712
- TE0713
The goal for this minimal Linux system is to provide standard hardware that can be used with same software images without the need to recompile or customize them.
IP Core | Base address | Interrupt | Board Part Interface | Notes |
---|---|---|---|---|
MicroBlaze | Configured with low end Linux option | |||
MIG | DDR3_SDRAM | Configured as per Module settings | ||
LMB_RAM | 0 | Size 32KByte, for FS-BOOT | ||
MDM | n/a | Configured without JTAG UART | ||
AXI_INTC | 0x4120_0000 | |||
AXI_TIMER | 0x41C0_0000 | 0 | 32 bit mode Dual Channel Mode | |
AXI_UARTLITE | 0x4060_0000 | 1 | BASE_UART0 | Configured with 115200 baud |
AXI_QUAD_SPI | 0x44A0_0000 | 2 | QSPI_FLASH | Connected to on-board Flash |
AXI_GPIO | 0x4000_0000 | not used | SYS_GPIO |
Overview
Content Tools