You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 17 Next »

The Trenz Electronic Starter Kit  consists of a TE0808 module on a TEBF0808 base board in Mini-ITX Enclosure.  See Shop Link for detailed content.

TE0808 UltraSOM+ - Wiki with TRM, reference projects, application notes and more

TE0790-XMOD FTDI JTAG Adapter - Wiki with settings and configurations

Vivado/SDK/SDSoC - Short instructions for Vivado, SDK, SDSoC

Project Delivery - General descriptions of reference designs and content

TE0808 Download Area - contains various reference designs, schematics, hardware designs, 3D models and more

TEBF0808 Download Area - contains schematics, hardware designs, 3D models and more

TE0790-XMOD Download Area - contains firmware with projects, schematics, hardware designs, 3D models and more

TE Master Pinout - Excel Sheet as Pinout-Viewer and XDC-Generator

Shop TE0808-Starter-Kit - contains prices, order number, content...

Xilinx Software and Driver

Vivado Design Suite - Xilinx Design Software with JTAG drivers and documentation

Xilinx Download Area - All Xilinx Software, Device Models and Libraries

Getting Started

WARNING: Do not changed DIP-Switch positions from both XMOD adapters on TEBF0808
  1. Connect cold-device plug with power supply and set power switch to on.

  2. Connect JTAG-USB cable with host PC. (Cable from XMOD on marker 25 of TEBF0808-REV2 Component Location picture)
  3. Insert SD-Card with predefined example into SD-Card slot.
  4. open Serial Console:
    1. COM Port: for correct number see device manager
    2. Speed:115200
  5. Press Core V1 Mini-ITX case power on button.
  6. Press Core V1 Mini-ITX reset button  to start boot process
  7. Linux login:
    1. User Name:root
    2. Password:root

Important Notes

For ES1 only:

Support

For support, please go to http://forum.trenz-electronic.de/ or contact support@trenz-electronic.de

  • No labels