This Trenz Electronic Starter Kit consists of a TE0808 module on a TEBF0808 base board in Mini-ITX Enclosure. See Shop Link for detailed content.
TE0808 UltraSOM+ - Wiki with TRM, reference projects, application notes and more
TE0790-XMOD FTDI JTAG Adapter - Wiki with settings and configurations
Vivado/SDK/SDSoC - Short instructions for Vivado, SDK, SDSoC
Project Delivery - General descriptions of reference designs and content
TE0808 Download Area - contains various reference designs, schematics, hardware designs, 3D models and more
TEBF0808 Download Area - contains schematics, hardware designs, 3D models and more
TE0790-XMOD Download Area - contains firmware with projects, schematics, hardware designs, 3D models and more
TE Master Pinout - Excel Sheet as Pinout-Viewer and XDC-Generator
Shop TE0808-Starter-Kit - contains prices, order number, content...
Xilinx Software and Driver
Vivado Design Suite - Xilinx Design Software with JTAG drivers and documentation
Xilinx Download Area - All Xilinx Software, Device Models and Libraries
Starter Kit is shipped with prebuilt Linux Example on SD. Newest version and sources are available on our download area: TE0808 Reference Designs
Connect main power and set power switch to on. See Main Power Enclosure Location
- Connect mini USB cable to host PC. (Cable from XMOD on marker 25 of TEBF0808-REV2 Component Location picture, the one with green dot, closer to the SoM)
- Insert SD-Card with pre-loaded content into SD-Card slot.
- Open Serial Console:
- COM Port: for correct number see device manager
- Press the Power on button on the enclosure. See Power Button, Reset Button, HDD LED and Power LED Enclosure Location
- Linux login:
- User Name:root
ES devices are not included in all Vivado versions, for ES1 only:
activate beta device see: FAQ - How can I activate beta devices?
For all Starter Kit's shipped before 2017-06-21:
Enclosure Power and HD LED was swapped on connector. See "Starter Kit Cable Connection - Enclosure Power Button , Reset Button, HDD LED and Power LED" section for correct connection.
Starter Kit Basic
Main Power Enclosure Location
Power Button , Reset Button, HDD LED and Power LED Enclosure Location
Default DIP Switch Settings
(with green dot)
Starter Kit Cable Connection
Starter Kit will be shipped with all cable connected.