You are viewing an old version of this page. View the current version.
NIOS II Design with SDRAM controller, flash memory test and different LED sequences.
Refer to http://trenz.org/max1000-info for the current online version of this manual and other available documentation.
- Quartus Prime Lite 20.1
- NIOS II
- User Flash memory
- SDRAM memory
- 3-axis Accelerometer
- User LEDs
- User buttons
Release Notes and Know Issues
|Issues||Description||Workaround||To be fixed version|
|No known issues||---||---||---|
|Quartus Prime Lite||20.1||needed|
|NIOS II SBT for eclipse||---||optional|
HardwareComplete List is available on <project folder>/board_files/*_devices.csv
Design supports following modules:
|Module Model||Board Part Short Name||PCB Revision Support||DDR||QSPI Flash||Others||Notes|
*used as reference
Design supports following carriers:
*used as reference
Additional HW Requirements:
|USB cable for JTAG/UART||Check Carrier Board and Programmer for correct type|
For general structure and of the reference design, see Project Delivery - Intel devices
<project folder>/source_files/<Board Part Short Name>/quartus
Quartus project will be generated by TE Scripts
optional, source files for specific assembly variants
<project folder>/source_files/<Board Part Short Name>/software
Additional software will be generated by TE Scripts
optional, source files for specific assembly variants
|SOPC Information File||*.sopcinfo||File with description of the *.qsys file to create software for the target hardware|
|Programmer Object File||*.pof||FPGA configuration file|
|Diverse Reports||---||Report files in different formats|
|Software Application File||*.elf||Software application for NIOS II processor system|
Reference Design is only usable with the specified Quartus version. Do never use different versions of Quartus software for the same project.
Reference Design is available on:
Reference Design is available with and without prebuilt files. It's recommended to use TE prebuilt files for first launch.
Trenz Electronic provides a tcl based built environment based on Quartus Design Flow.
The Trenz Electronic FPGA Reference Designs are TCL-script based projects. To create a project, open a project or program a device execute "create_project_win.cmd" on Windows OS and "create_project_linux.sh" on Linux OS.
TE Scripts are only needed to generate the quartus project, all other additional steps are optional and can also executed by Intel Quartus/SDK GUI. For currently Scripts limitations on Win and Linux OS see: Project Delivery - Intel devices → Currently limitations of functionality
- Open create_project_win.cmd/create_project_linux.sh:
- Select Board in "Board selection"
- Click on "Create project" button to create project
- (optional for manual changes) Select correct quartus installation path in "<project folder>/settings/design_basic_settings.tcl"
Check Module and Carrier TRMs for proper HW configuration before you try any design.
- Connect the Module to USB-Port
- Open create_project_win.cmd/create_project_linux.sh
- Select correct board in "Board selection"
- Click on "Program device" button
- if prebuilt files are available: select "Program prebuilt file"
- using own generated programming file: select "Program other file" and click on "Browse ..." to open own generated programming file
- (optional) click on "Open programmer GUI" to program device with Quartus programmer GUI
- Click on "Start program device" button
Not used on this example.
- Prepare Hardware like described on section Programming
- Connect UART USB (most cases same as JTAG)
- Open Serial Console (e.g. PuTTY)
- COM Port: Win OS see device manager, Linux OS see dmesg | grep tty (UART is *USB1)
- Speed: 115200
- Press reset button
- Console output depends on used Software project, see Software Design - SDK#Application
System Design - Quartus
The block designs may differ depending on the assembly variant.
Software Design - SDK
Used software project depends on board assembly variant. Template location: <project folder>/source_files/software/
Software example to test TEI0001 module.
- You can toggle between following modes by pressing user button
- Spirit level
- Winbond SPI flash memory test
- Shift register sequence
- Knightrider sequence
- Case statement sequence
Appx. A: Change History and Legal Notices
Document Change History
To get content of older revision got to "Change History" of this page and select older document revision number.
Please also note our data protection declaration at https://www.trenz-electronic.de/en/Data-protection-Privacy
The material contained in this document is provided “as is” and is subject to being changed at any time without notice. Trenz Electronic does not warrant the accuracy and completeness of the materials in this document. Further, to the maximum extent permitted by applicable law, Trenz Electronic disclaims all warranties, either express or implied, with regard to this document and any information contained herein, including but not limited to the implied warranties of merchantability, fitness for a particular purpose or non infringement of intellectual property. Trenz Electronic shall not be liable for errors or for incidental or consequential damages in connection with the furnishing, use, or performance of this document or of any information contained herein.
Limitation of Liability
In no event will Trenz Electronic, its suppliers, or other third parties mentioned in this document be liable for any damages whatsoever (including, without limitation, those resulting from lost profits, lost data or business interruption) arising out of the use, inability to use, or the results of use of this document, any documents linked to this document, or the materials or information contained at any or all such documents. If your use of the materials or information from this document results in the need for servicing, repair or correction of equipment or data, you assume all costs thereof.
No part of this manual may be reproduced in any form or by any means (including electronic storage and retrieval or translation into a foreign language) without prior agreement and written consent from Trenz Electronic.
The hardware / firmware / software described in this document are furnished under a license and may be used /modified / copied only in accordance with the terms of such license.
To confront directly with the responsibility toward the environment, the global community and eventually also oneself. Such a resolution should be integral part not only of everybody's life. Also enterprises shall be conscious of their social responsibility and contribute to the preservation of our common living space. That is why Trenz Electronic invests in the protection of our Environment.
REACH, RoHS and WEEE
Trenz Electronic is a manufacturer and a distributor of electronic products. It is therefore a so called downstream user in the sense of REACH. The products we supply to you are solely non-chemical products (goods). Moreover and under normal and reasonably foreseeable circumstances of application, the goods supplied to you shall not release any substance. For that, Trenz Electronic is obliged to neither register nor to provide safety data sheet. According to present knowledge and to best of our knowledge, no SVHC (Substances of Very High Concern) on the Candidate List are contained in our products. Furthermore, we will immediately and unsolicited inform our customers in compliance with REACH - Article 33 if any substance present in our goods (above a concentration of 0,1 % weight by weight) will be classified as SVHC by the European Chemicals Agency (ECHA).
Trenz Electronic GmbH herewith declares that all its products are developed, manufactured and distributed RoHS compliant.
Information for users within the European Union in accordance with Directive 2002/96/EC of the European Parliament and of the Council of 27 January 2003 on waste electrical and electronic equipment (WEEE).
Users of electrical and electronic equipment in private households are required not to dispose of waste electrical and electronic equipment as unsorted municipal waste and to collect such waste electrical and electronic equipment separately. By the 13 August 2005, Member States shall have ensured that systems are set up allowing final holders and distributors to return waste electrical and electronic equipment at least free of charge. Member States shall ensure the availability and accessibility of the necessary collection facilities. Separate collection is the precondition to ensure specific treatment and recycling of waste electrical and electronic equipment and is necessary to achieve the chosen level of protection of human health and the environment in the European Union. Consumers have to actively contribute to the success of such collection and the return of waste electrical and electronic equipment. Presence of hazardous substances in electrical and electronic equipment results in potential effects on the environment and human health. The symbol consisting of the crossed-out wheeled bin indicates separate collection for waste electrical and electronic equipment.
Trenz Electronic is registered under WEEE-Reg.-Nr. DE97922676.
Table of contents
- No labels