Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 11 Next »

Download PDF version of this document.

Table of Contents


The Trenz Electronic TEI0015 is an commercial-grade module based on Intel® MAX 10. Intel MAX 10 devices are the ideal solution for system management, I/O expansion, communication control planes, industrial, automotive, and consumer applications.

Refer to for the current online version of this manual and other available documentation.

Key Features

  • Intel® MAX 10 Commercial [10M08SAU169C8G]
    • Package: 169-UBGA
    • Speed Grade: C8 (Slowest)
    • Temperature: 0°C ~ 85°C
  • SDRAM Memory up to 64Mb, 166MHz
  • Dual High Speed USB to Multipurpose UART/FIFO IC
  • Quad SPI Flash, 64Mb
  • EEPROM Memory, 4Kb
  • 8x User LED 

  • USB port

  • 18 Bit Analog to Digital Converter

  • 2x SMA Female Connector

  • Power Supply:

    • 5V

  • Others:

    • Dimension: 86m x 25m

    • Instrumentation Amplifier

    • Voltage Feedback Amplifier

Block Diagram

TExxxx block diagram

Main Components

TEI0015 main components
  1. SMA Connector, J5...6
  2. Instrumentation Amplifier, U12- U14
  3. Series Voltage Reference, U8
  4. Analog to Digital Convertor, U15- U6
  5. Voltage Regulator, U10- U13- U16
  6. Buck Switching Regulator, U11- U4
  7. Intel® MAX 10, U1
  8. SDRAM Memory, U2
  9. SPI Flash Memory, U5
  10. USP to UART convertor, U3
  11. User LEDs, D2...9
  12. 4Kb EEPROM, U9
  13. Switch, S1...2
  14. USB port, J9

Initial Delivery State

Storage device name



Quad SPI Flash



System Controller CPLD

Initial delivery state of programmable devices on the module

Configuration Signals

MODE Signal State

Boot Mode

Boot process.



Reset process.

Signals, Interfaces and Pins

Board to Board (B2B) I/Os

FPGA bank number and number of I/O signals connected to the B2B connector:

FPGA BankB2B ConnectorI/O Signal CountVoltage LevelNotes

General PL I/O to B2B connectors information

JTAG Interface

JTAG access to the TExxxx SoM through B2B connector JMX.

JTAG Signal

B2B Connector


JTAG pins connection

MIO Pins

MIO PinConnected toB2BNotes

MIOs pins

On-board Peripherals


On board peripherals

Quad SPI Flash Memory

MIO PinSchematicU?? PinNotes

Quad SPI interface MIOs and pins


MIO PinSchematicU? PinNotes

I2C interface MIOs and pins

MIO PinI2C AddressDesignatorNotes

I2C Address for RTC


MIO PinSchematicU?? PinNotes

I2C EEPROM interface MIOs and pins

MIO PinI2C AddressDesignatorNotes

I2C address for EEPROM


SchematicColorConnected toActive LevelNote

On-board LEDs


The TE???? SoM has ??? GByte volatile DDR3 SDRAM IC for storing user application code and data.

  • Part number: 
  • Supply voltage:
  • Speed: 
  • NOR Flash
  • Temperature: 


BankSignal NameETH1ETH2Signal Description

Ethernet PHY to Zynq SoC connections

CAN Transceiver

BankSchematicU?? PinNotes

Driver Input

Reciever Output
CAN Tranciever interface MIOs

Clock Sources






Power and Power-On Sequence

Power Supply

Power supply with minimum current capability of xx A for system startup is recommended.

Power Consumption

Power Input PinTypical Current
Power Consumption

* TBD - To Be Determined

Power Distribution Dependencies

Create DrawIO object here: Attention if you copy from other page, objects are only linked.

Power Distribution

Power-On Sequence

Create DrawIO object here: Attention if you copy from other page, objects are only linked.

Power Sequency

Voltage Monitor Circuit

Create DrawIO object here: Attention if you copy from other page, objects are only linked.

Voltage Monitor Circuit

Power Rails

Power Rail Name

B2B Connector

JM1 Pin

B2B Connector

JM2 Pin

B2B Connector

JM3 Pin


Module power rails.

Bank Voltages


Schematic Name



Zynq SoC bank voltages.

Board to Board Connectors

? x ? modules use two or three Samtec Micro Tiger Eye Connector on the bottom side.

  • 3 x REF-??????? (compatible to ????????), (?? pins, ?? per row)

    Operating Temperature: -??°C ~ ??°C
    Current Rating: ??A per ContactNumber of Positions: ??
    Number of Rows: ??

Technical Specifications

Absolute Maximum Ratings










PS absolute maximum ratings

Recommended Operating Conditions

Operating temperature range depends also on customer design and cooling solution. Please contact us for options.

ParameterMinMaxUnitsReference Document

VSee ???? datasheets.

VSee Xilinx ???? datasheet.

VSee Xilinx ???? datasheet.

VSee Xilinx ???? datasheet.

VSee Xilinx ???? datasheet.

VSee Xilinx ???? datasheet.

VSee Xilinx ???? datasheet.

°CSee Xilinx ???? datasheet.

°CSee Xilinx ???? datasheet.
Recommended operating conditions.

Physical Dimensions

  • Module size: ?? mm × ?? mm.  Please download the assembly diagram for exact numbers.

  • Mating height with standard connectors: ? mm.

PCB thickness: ?? mm.

Create DrawIO object here: Attention if you copy from other page, objects are only linked.

Physical Dimension

Currently Offered Variants 

Trenz shop TE0728 overview page
English pageGerman page
Trenz Electronic Shop Overview

Revision History

Hardware Revision History

List of online PCN ...Link


Hardware Revision History

Document Change History



Pedram Babakhani

  • change list



  • --
Document change history.


Data Privacy

Please also note our data protection declaration at

Document Warranty

The material contained in this document is provided “as is” and is subject to being changed at any time without notice. Trenz Electronic does not warrant the accuracy and completeness of the materials in this document. Further, to the maximum extent permitted by applicable law, Trenz Electronic disclaims all warranties, either express or implied, with regard to this document and any information contained herein, including but not limited to the implied warranties of merchantability, fitness for a particular purpose or non infringement of intellectual property. Trenz Electronic shall not be liable for errors or for incidental or consequential damages in connection with the furnishing, use, or performance of this document or of any information contained herein.

Limitation of Liability

In no event will Trenz Electronic, its suppliers, or other third parties mentioned in this document be liable for any damages whatsoever (including, without limitation, those resulting from lost profits, lost data or business interruption) arising out of the use, inability to use, or the results of use of this document, any documents linked to this document, or the materials or information contained at any or all such documents. If your use of the materials or information from this document results in the need for servicing, repair or correction of equipment or data, you assume all costs thereof.

Copyright Notice

No part of this manual may be reproduced in any form or by any means (including electronic storage and retrieval or translation into a foreign language) without prior agreement and written consent from Trenz Electronic.

Technology Licenses

The hardware / firmware / software described in this document are furnished under a license and may be used /modified / copied only in accordance with the terms of such license.

Environmental Protection

To confront directly with the responsibility toward the environment, the global community and eventually also oneself. Such a resolution should be integral part not only of everybody's life. Also enterprises shall be conscious of their social responsibility and contribute to the preservation of our common living space. That is why Trenz Electronic invests in the protection of our Environment.



Trenz Electronic is a manufacturer and a distributor of electronic products. It is therefore a so called downstream user in the sense of REACH. The products we supply to you are solely non-chemical products (goods). Moreover and under normal and reasonably foreseeable circumstances of application, the goods supplied to you shall not release any substance. For that, Trenz Electronic is obliged to neither register nor to provide safety data sheet. According to present knowledge and to best of our knowledge, no SVHC (Substances of Very High Concern) on the Candidate List are contained in our products. Furthermore, we will immediately and unsolicited inform our customers in compliance with REACH - Article 33 if any substance present in our goods (above a concentration of 0,1 % weight by weight) will be classified as SVHC by the European Chemicals Agency (ECHA).


Trenz Electronic GmbH herewith declares that all its products are developed, manufactured and distributed RoHS compliant.


Information for users within the European Union in accordance with Directive 2002/96/EC of the European Parliament and of the Council of 27 January 2003 on waste electrical and electronic equipment (WEEE).

Users of electrical and electronic equipment in private households are required not to dispose of waste electrical and electronic equipment as unsorted municipal waste and to collect such waste electrical and electronic equipment separately. By the 13 August 2005, Member States shall have ensured that systems are set up allowing final holders and distributors to return waste electrical and electronic equipment at least free of charge. Member States shall ensure the availability and accessibility of the necessary collection facilities. Separate collection is the precondition to ensure specific treatment and recycling of waste electrical and electronic equipment and is necessary to achieve the chosen level of protection of human health and the environment in the European Union. Consumers have to actively contribute to the success of such collection and the return of waste electrical and electronic equipment. Presence of hazardous substances in electrical and electronic equipment results in potential effects on the environment and human health. The symbol consisting of the crossed-out wheeled bin indicates separate collection for waste electrical and electronic equipment.

Trenz Electronic is registered under WEEE-Reg.-Nr. DE97922676.

  • No labels