Template Revision 2.7 - on construction

Design Name always "TE Series Name" + Design name, for example "TE0720 Test Board"


<!-- tables have all same width (web max 1200px and pdf full page(640px), flexible width or fix width on menu for single column can be used as before) -->
<style>
.wrapped{
  width: 100% !important;
  max-width: 1200px !important;
 }
</style>


Important General Note:

  • Export PDF to download, if vivado revision is changed!

  • Designate all graphics and pictures with a number and a description, Use "Scroll Title" macro

    • Use "Scroll Title" macro for pictures and table labels. Figure number must be set manually at the moment (automatically enumeration is planned by scrollPDF)
      • Figure template (note: inner scroll ignore/only only with drawIO object):


        Create DrawIO object here: Attention if you copy from other page, use


        image link to the generate DrawIO PNG file of this page. This is a workaround until scroll pdf export bug is fixed



      • Table template:

        • Layout macro can be use for landscape of large tables
        • Set column width manually(can be used for small tables to fit over whole page) or leave empty (automatically)

      • ExampleComment
        12



  • ...


Table of contents

Overview

Notes :

Linux with basic periphery of TE0807 Starterkit (TEBF0808 Carrier).

Refer to http://trenz.org/te0807-info for the current online version of this manual and other available documentation.

Key Features

Notes :

  • Add basic key futures, which can be tested with the design


  • Vitis/Vivado 2019.2
  • petalinux
  • Linux Debian 9 (Stretch) or Linux Ubuntu 18.04 (Bionic Beaver)
  • DisplayPort
  • TEBF0808
  • USB
  • ETH (use EEPROM MAC)
  • MAC from EEPROM
  • PCIe
  • SATA
  • SD
  • I2C
  • RGPIO
  • DP
  • user LED access
  • Modified FSBL for Si5338 programming
  • Special FSBL for QSPI Programming

Revision History

Notes :

  • add every update file on the download
  • add design changes on description


DateVivadoProject BuiltAuthorsDescription
2020-05-112019.2

TE0807-SK_DEMO1-vivado_2019.2-build_11_20200511100750.zip
TE0807-SK_DEMO1_noprebuilt-vivado_2019.2-build_11_20200511101309.zip

Mohsen Chamanbaz
  • initial release


Release Notes and Know Issues

Notes :
  • add known Design issues and general notes for the current revision
  • do not delete known issue, add fixed version time stamp if  issue fixed


IssuesDescriptionWorkaround/SolutionTo be fixed version
No known issues---------


Requirements

Software

Notes :

  • list of software which was used to generate the design


SoftwareVersionNote
Vitis2019.2needed, Vivado is included into Vitis installation
PetaLinux2019.2needed

SD Card Formatter


format SD Card

Win32 DiskImager


burn generated image on SD
SI ClockBuilder Pro---optional


Hardware

Notes :

  • list of software which was used to generate the design

Basic description of TE Board Part Files is available on TE Board Part Files.

Complete List is available on <design name>/board_files/*_board_files.csv

Design supports following modules:

Module ModelBoard Part Short NamePCB Revision SupportDDRQSPI FlashEMMCOthersNotes
TE0807-01-07EV-ES   es2_2gb      REV01    2GB      64GB       NA         NA     Not longer supported by vivado
TE0807-02-07EV-1E   7ev_1e_4gb   REV02    4GB      64GB       NA         NA     NA                               
TE0807-02-07EV-1EK  7ev_1e_4gb   REV02    4GB      64GB       NA         NA     with heat sink                 
TE0807-02-4BE21-A   4eg_1e_4gb   REV02    4GB      128MB      NA         NA     NA                               
TE0807-02-7DE21-A   7ev_1e_4gb   REV02    4GB      128MB      NA         NA     NA                               
TE0807-02-7DI21-C   7ev_1i_4gb   REV02    4GB      128MB      NA         NA     without encryption             
TE0807-02-7DI21-A   7ev_1i_4gb   REV02    4GB      128MB      NA         NA     NA                               
TE0807-02-4AI21-A   4cg_1i_4gb   REV02    4GB      128MB      NA         NA     NA                               
TE0807-02-5AI21-A   5cg_1i_4gb   REV02    4GB      128MB      NA         NA     NA                               
TE0807-02-7AI21-A   7cg_1i_4gb   REV02    4GB      128MB      NA         NA     NA                               
TE0807-02-7DI24-A   7ev_1i_4gb   REV02    4GB      512MB      NA         NA     NA                               
TE0807-02-7DE21-AK  7ev_1e_4gb   REV02    4GB      128MB      NA         NA     with heat sink             


Note: Design contains also Board Part Files for TE0807 only configuration, this boart part files are not used for this reference design.

Design supports following carriers:

Carrier ModelNotes
TEBF0808Used as reference carrier. Important: CPLD Firmware REV07 or newer is recommended


Additional HW Requirements:

Additional HardwareNotes
CoolerIt's recommended to use cooler on ZynqMP device
USB CableConnect to USB2 or better USB3 Hub for proper power supply over USB
DP MonitorOptional HW
Not all monitors are supported, also Adapter to other  Standard can make drouble.
Design was testet with  DELL U2412M
Micro USB to USB A AdapterAdapter for USB Hub
USB HUBTo connnect Mouse and Keyboard simultaneously
USB Keyboardneed for Ubuntu/Debian GUI
USB Mouseneed for Ubuntu/Debian GUI
DP Cable--
Sata DiskOptional HW
SATA CableOptional HW
PCIe CardOptional HW
ETH Cable

Optional HW
Ethernet works with DHCP, but can be setup also manually

SD Card16GB


Content

Notes :

  • content of the zip file

For general structure and of the reference design, see Project Delivery - Xilinx devices

Design Sources

TypeLocationNotes
Vivado<design name>/block_design
<design name>/constraints
<design name>/ip_lib
Vivado Project will be generated by TE Scripts
Vitis<design name>/sw_libAdditional Software Template for Vitis and apps_list.csv with settings automatically for Vitis app generation
PetaLinux<design name>/os/petalinuxPetaLinux template with current configuration


Additional Sources

TypeLocationNotes
SI5345<design name>/misc/Si5345SI5345 Project with current PLL Configuration


Prebuilt

Notes :

  • prebuilt files
  • Template Table:

    • File

      File-Extension

      Description

      BIF-File*.bifFile with description to generate Bin-File
      BIN-File*.binFlash Configuration File with Boot-Image (Zynq-FPGAs)
      BIT-File*.bitFPGA (PL Part) Configuration File
      DebugProbes-File*.ltxDefinition File for Vivado/Vivado Labtools Debugging Interface

      Debian SD-Image

      *.img

      Debian Image for SD-Card

      Diverse Reports---Report files in different formats
      Hardware-Platform-Specification-Files*.xsaExported Vivado Hardware Specification for Vitis and PetaLinux
      LabTools Project-File*.lprVivado Labtools Project File

      MCS-File

      *.mcs

      Flash Configuration File with Boot-Image (MicroBlaze or FPGA part only)

      MMI-File

      *.mmi

      File with BRAM-Location to generate MCS or BIT-File with *.elf content (MicroBlaze only)

      OS-Image*.ubImage with Linux Kernel (On Petalinux optional with Devicetree and RAM-Disk)
      Image---Generic Linux kernel binary image file
      Software-Application-File*.elfSoftware Application for Zynq or MicroBlaze Processor Systems

      SREC-File

      *.srec

      Converted Software Application for MicroBlaze Processor Systems

      Device Tree Blob File*.dtbContains a Device Tree Blob




File

File-Extension

Description

BIF-File*.bifFile with description to generate Bin-File
BIN-File*.binFlash Configuration File with Boot-Image (Zynq-FPGAs)
BIT-File*.bitFPGA (PL Part) Configuration File
DebugProbes-File*.ltxDefinition File for Vivado/Vivado Labtools Debugging Interface
Diverse Reports---Report files in different formats
Hardware-Platform-Specification-Files*.xsaExported Vivado Hardware Specification for Vitis and PetaLinux
LabTools Project-File*.lprVivado Labtools Project File
OS-Image*.ubImage with Linux Kernel (On Petalinux optional with Devicetree and RAM-Disk)
Image---Generic Linux kernel binary image file
Software-Application-File*.elfSoftware Application for Zynq or MicroBlaze Processor Systems
Device Tree Blob File*.dtbContains a Device Tree Blob


Download

Reference Design is only usable with the specified Vivado/SDK/PetaLinux/SDx version. Do never use different Versions of Xilinx Software for the same Project.

Reference Design is available on:

Design Flow

Notes :
  • Basic Design Steps

  • Add/ Remove project specific description


Reference Design is available with and without prebuilt files. It's recommended to use TE prebuilt files for first lunch.


Trenz Electronic provides a tcl based built environment based on Xilinx Design Flow.

See also:

The Trenz Electronic FPGA Reference Designs are TCL-script based project. Command files for execution will be generated with "_create_win_setup.cmd" on Windows OS and "_create_linux_setup.sh" on Linux OS.

TE Scripts are only needed to generate the vivado project, all other additional steps are optional and can also executed by Xilinx Vivado/SDK GUI.  For currently Scripts limitations on Win and Linux OS see: Project Delivery Currently limitations of functionality


  1. _create_win_setup.cmd/_create_linux_setup.sh and follow instructions on shell:
  2. Press 0 and enter to start "Module Selection Guide"
  3. (optional Win OS) Generate Virtual Drive or use short directory  for the reference design (for example x:\<design name>)
  4. Create Project (follow instruction of the product selection guide), settings file will be configured automatically during this process)
    1. (optional for manual changes) Select correct device and Xilinx install path on "design_basic_settings.cmd" and create Vivado project with "vivado_create_project_guimode.cmd"
      Note: Select correct one, see alsoTE Board Part Files
      1. Important: Use Board Part Files, which ends with *_tebf0808
  5. Create XSA and export to prebuilt folder
    1. Run on Vivado TCL: TE::hw_build_design -export_prebuilt
      Note: Script generate design and export files into \prebuilt\hardware\<short dir>. Use GUI is the same, except file export to prebuilt folder
  6. Create Linux (bl31.elf, uboot.elf , Image and system.dtb) with exported XSA
    1. XSA is exported to "prebuilt\hardware\<short name>"
      Note: HW Export from Vivado GUI create another path as default workspace.
    2. Create Linux images on VM, see PetaLinux KICKstart
      1. Use TE Template from /os/petalinux/
      2. Execute the script file for Debian/Ubuntu
  7. Add Linux files (bl31.elf, uboot.elf , Image and system.dtb) to prebuilt folder
    1. "prebuilt\os\petalinux\<ddr size>" or "prebuilt\os\petalinux\<short name>"
  8. Generate Programming Files with Vitis
    1. Run on Vivado TCL: TE::sw_run_vitis -all
      Note: Scripts generate applications and bootable files, which are defined in "sw_lib\apps_list.csv"
    2. (alternative) Start SDK with Vivado GUI or start with TE Scripts on Vivado TCL: TE::sw_run_vitis
      Note:  TCL scripts generate also platform project, this must be done manuelly in case GUI is used. See Vitis
  9. Preparing SD card for SD Filesystem and hard disk for HD Filesystem → See Programming section

Launch

Note:

  • Programming and Startup procedure

For basic board setup, LEDs... see: TEBF0808 Getting Started

Programming

Check Module and Carrier TRMs for proper HW configuration before you try any design.

Xilinx documentation for programming and debugging: Vivado/SDK/SDSoC-Xilinx Software Programming and Debugging

Get prebuilt boot binaries

  1. _create_win_setup.cmd/_create_linux_setup.sh and follow instructions on shell
  2. Press 0 and enter to start "Module Selection Guide"
    1. Select assembly version
    2. Validate selection
    3. Select Create and open delivery binary folder
      Note: Folder (<project foler>/_binaries_<Artikel Name>) with subfolder (boot_<app name>) for different applications will be generated

QSPI

Not used in this example.

SD

  1. Format the SD Card with SD Card Formatter or other tool
  2. Write the Debian image or Ubuntu image file on SD Card with Win32DiskImager
  3. It will automatically in BOOT directory two DTB file generated
    1. system_sd.dtb : This file ist used , if the root file system is located on SD card.
    2. system_harddisk.dtb : This file ist used , if the root file system is located on hard disk.
    3. Note: To use one of the DTB files, this file must be renamed to system.dtb
  4. Rename the system_sd.dtb file in BOOT directory to system.dtb
  5. Copy Petalinux  Image (not use image.ub), system.dtb and Boot.bin files on SD-Card.
  6. Set Boot Mode to SD-Boot.
  7. Insert SD-Card in SD-Slot.

JTAG

Not used on this Example.

Usage

  1. Prepare HW like described on section TE0807 StarterKit#Programming
  2. Connect UART USB (JTAG XMOD)
  3. Select SD Card as Boot Mode (or QSPI - depending on step 1)
    Note: See TRM of the Carrier, which is used.
  4. (Optional) Insert PCIe Card (detection depends on Linux driver. Only some basic drivers are installed)
  5. (Optional) Connect Sata Disc
  6. (Optional) Connect DisplayPort Monitor (List of usable Monitors: https://www.xilinx.com/support/answers/68671.html)
  7. (Optional) Connect Network Cable
  8. Power On PCB
    Note: 1. ZynqMP Boot ROM loads PMU Firmware and  FSBL from SD into OCM, 2. FSBL loads ATF(bl31.elf) and U-boot from SD/QSPI into DDR, 3. U-boot load Linux from SD into DDR.

Linux

  1. Open Serial Console (e.g. putty)
    1. Speed: 115200
    2. COM Port: Win OS, see device manager, Linux OS see  dmesg |grep tty  (UART is *USB1)
  2. Linux Console:
    Note: Wait until Linux boot finished For Linux Login use:
    1. User Name: root
    2. Password: root
  3. You can use Linux shell now.
  4. Debian Desktop
    1. Use connected mouse + keyboard for interaction with GUI
    2. Start the GUI with the command : startx
    3. Web Browser Dillo open console and type dillo or use browser
    4. open console and start video or audio with "mplayer <video or audio file>"
  5. Ubuntu Desktop
    1. Use connected mouse + keyboard for interaction with GUI
    2. Start the GUI with the command : startx
    3. Web Browser Mozilla firefox can be used.
    4. Audio or Vider file can also be performed directly in GUI


Hard Disk (optional)

To locate root file system on Hard disk:

  1. Plug in SD Card that you have prepared mit root file system
  2. Plug in Hard Disk in Sata port on the carrier board
  3. Format the hard disk by the following command:
    1. mkfs.ext4 /dev/sda
  4. Edit the fstab file in directory /etc/ to mount hard disk by the following commands:
    1. mkdir /media/harddisk
    2. nano /etc/fstab
    3. Add this line to the fstab file and save it : /dev/sda  /media/harddisk/   defaults  0  3
    4. Reboot
  5. Copy entire root file system in direcroty ROOTFS from SD card to hard disk by the following commands:
    1. cd /media/ROOTFS
    2. cp -r ./ /media/harddisk
  6. Edit the fstab file in directory /media/harddisk/etc/ by the following commands and save it:
    1. nano /media/harddisk/etc/fstab
    2. Edit this line to the fstab file : /dev/sda  /media/harddisk/   defaults  0  1
    3. Comment this line: #/dev/mmcblk1p2   /media/ROOTFS     defaults  0  1
  7. Shutdown the system
  8. Format the SD card
  9. Rename the Device Tree Blob file system_harddisk.dtb to system.dtb
  10. Copy the following files to SD Card:
    1. Image
    2. BOOT.bin
    3. system.dtb
  11. Plug in the SD Card and turn on the system

Vivado Hardware Manager

Note:

  • Add picture of HW Manager

  • add notes for the signal either groups or topics, for example:

    Control:

    • add controllable IOs with short notes..

    Monitoring:

    • add short notes for signals which will be monitored only

    SI5338_CLK0 Counter: 

    Open Vivado HW-Manager and add VIO signal to dashboard (*.ltx located on prebuilt folder).Set radix from VIO signals to unsigned integer.Note: Frequency Counter is inaccurate and displayed unit is Hz

System Design - Vivado

Note:

  • Description of Block Design, Constrains... BD Pictures from Export...

Block Design

PS Interfaces

Note:

  • optional for Zynq / ZynqMP only

  • add basic PS configuration

Activated interfaces:

TypeNote
DDR
QSPIMIO
SD0MIO
SD1MIO
CAN0EMIO
I2C0MIO
PJTAG0MIO
UART0MIO
GPIO0MIO
SWDT0..1
TTC0..3
GEM3MIO
USB0MIO/GTP
PCIeMIO/GTP
SATAGTP
DisplayPortEMIO/GTP


Constrains

Basic module constrains

set_property BITSTREAM.GENERAL.COMPRESS TRUE [current_design]
set_property BITSTREAM.CONFIG.UNUSEDPIN PULLNONE [current_design]

Design specific constrain


#System Controller IP

#J3:31 LED_HD
set_property PACKAGE_PIN K11 [get_ports BASE_sc0]
#J3:41
set_property PACKAGE_PIN E14 [get_ports BASE_sc5]
#J3:45
set_property PACKAGE_PIN C12 [get_ports BASE_sc6]
#J3:47
set_property PACKAGE_PIN D12 [get_ports BASE_sc7]
#J3:32
set_property PACKAGE_PIN J12 [get_ports BASE_sc10_io]
#J3:34
set_property PACKAGE_PIN K13 [get_ports BASE_sc11]
#J3:36
set_property PACKAGE_PIN A13 [get_ports BASE_sc12]
#J3:38
set_property PACKAGE_PIN A14 [get_ports BASE_sc13]
#J3:40
set_property PACKAGE_PIN E12 [get_ports BASE_sc14]
#J3:42
set_property PACKAGE_PIN F12 [get_ports BASE_sc15]
#J3:46 CAN S
set_property PACKAGE_PIN A12 [get_ports BASE_sc16]
#J3:48 LED_XMOD
set_property PACKAGE_PIN B12 [get_ports BASE_sc17]
#J3:50 CAN TX 
set_property PACKAGE_PIN B14 [get_ports BASE_sc18]
#J3:52 CAN RX 
set_property PACKAGE_PIN C14 [get_ports BASE_sc19]

set_property IOSTANDARD LVCMOS18 [get_ports BASE_sc0]
set_property IOSTANDARD LVCMOS18 [get_ports BASE_sc5]
set_property IOSTANDARD LVCMOS18 [get_ports BASE_sc6]
set_property IOSTANDARD LVCMOS18 [get_ports BASE_sc7]
set_property IOSTANDARD LVCMOS18 [get_ports BASE_sc10_io]
set_property IOSTANDARD LVCMOS18 [get_ports BASE_sc11]
set_property IOSTANDARD LVCMOS18 [get_ports BASE_sc12]
set_property IOSTANDARD LVCMOS18 [get_ports BASE_sc13]
set_property IOSTANDARD LVCMOS18 [get_ports BASE_sc14]
set_property IOSTANDARD LVCMOS18 [get_ports BASE_sc15]
set_property IOSTANDARD LVCMOS18 [get_ports BASE_sc16]
set_property IOSTANDARD LVCMOS18 [get_ports BASE_sc17]
set_property IOSTANDARD LVCMOS18 [get_ports BASE_sc18]
set_property IOSTANDARD LVCMOS18 [get_ports BASE_sc19]

# PLL
#J4:74
#set_property PACKAGE_PIN AF15 [get_ports {si570_clk_p[0]}]
#set_property IOSTANDARD LVDS [get_ports {si570_clk_p[0]}]
#set_property IOSTANDARD LVDS [get_ports {si570_clk_n[0]}]



# Audio Codec
#LRCLK		J3:49 B47_L9_N
#BCLK		J3:51 B47_L9_P
#DAC_SDATA	J3:53 B47_L7_N
#ADC_SDATA	J3:55 B47_L7_P
set_property PACKAGE_PIN G14 [get_ports I2S_lrclk ]
set_property PACKAGE_PIN H14 [get_ports I2S_bclk ]
set_property PACKAGE_PIN C13 [get_ports I2S_sdin ]
set_property PACKAGE_PIN D14 [get_ports I2S_sdout ]
set_property IOSTANDARD LVCMOS18 [get_ports I2S_lrclk ]
set_property IOSTANDARD LVCMOS18 [get_ports I2S_bclk ]
set_property IOSTANDARD LVCMOS18 [get_ports I2S_sdin ]
set_property IOSTANDARD LVCMOS18 [get_ports I2S_sdout ]






Software Design - Vitis

Note:
  • optional chapter separate

  • sections for different apps

For SDK project creation, follow instructions from:

Vitis

Application

----------------------------------------------------------

FPGA Example

scu

MCS Firmware to configure SI5338 and Reset System.

srec_spi_bootloader

TE modified 2019.2 SREC

Bootloader to load app or second bootloader from flash into DDR

Descriptions:

  • Modified Files: blconfig.h, bootloader.c
  • Changes:
    • Add some console outputs and changed bootloader read address.
    • Add bugfix for 2018.2 qspi flash

xilisf_v5_11

TE modified 2019.2 xilisf_v5_11

  • Changed default Flash type to 5.

----------------------------------------------------------

Zynq Example:

zynq_fsbl

TE modified 2019.2 FSBL

General:

  • Modified Files:main.c, fsbl_hooks.h/.c (search for 'TE Mod' on source code)
  • Add Files: te_fsbl_hooks.h/.c(for hooks and board)\n\

  • General Changes: 
    • Display FSBL Banner and Device ID

Module Specific:

  • Add Files: all TE Files start with te_*
    • READ MAC from EEPROM and make Address accessible by UBOOT (need copy defines on uboot  platform-top.h)
    • CPLD access
    • Read CPLD Firmware and SoC Type
    • Configure Marvell PHY

zynq_fsbl_flash

TE modified 2019.2 FSBL

General:

  • Modified Files: main.c
  • General Changes:
    •  Display FSBL Banner
    • Set FSBL Boot Mode to JTAG
    • Disable Memory initialisation

ZynqMP Example:

----------------------------------------------------------

zynqmp_fsbl

TE modified 2019.2 FSBL

General:

  • Modified Files: xfsbl_main.c, xfsbl_hooks.h/.c, xfsbl_board.h/.c(search for 'TE Mod' on source code)
  • Add Files:  te_xfsbl_hooks.h/.c (for hooks and board)\n\
  • General Changes: 
    • Display FSBL Banner and Device Name

Module Specific:

  • Add Files: all TE Files start with te_*
    • Si5338 Configuration
    • ETH+OTG Reset over MIO

zynqmp_fsbl_flash

TE modified 2019.2 FSBL

General:

  • Modified Files: xfsbl_initialisation.c, xfsbl_hw.h, xfsbl_handoff.c, xfsbl_main.c
  • General Changes:
    •  Display FSBL Banner
    • Set FSBL Boot Mode to JTAG
    • Disable Memory initialisation


zynqmp_pmufw

Xilinx default PMU firmware.

----------------------------------------------------------

General Example:

hello_te0820

Hello TE0820 is a Xilinx Hello World example as endless loop instead of one console output.

u-boot

U-Boot.elf is generated with PetaLinux. SDK/HSI is used to generate Boot.bin.

SDK template in ./sw_lib/sw_apps/ available.

zynqmp_fsbl

TE modified 2019.2 FSBL

General:

Module Specific:

zynqmp_fsbl_flash

TE modified 2019.2 FSBL

General:

zynqmp_pmufw

Xilinx default PMU firmware.

hello_te0807

Hello TE0807 is a Xilinx Hello World example as endless loop instead of one console output.

u-boot

U-Boot.elf is generated with PetaLinux. Vitis is used to generate Boot.bin.

Software Design -  PetaLinux

Note:
  • optional chapter separate

  • sections for linux

  • Add "No changes." or "Activate: and add List"

For PetaLinux installation and  project creation, follow instructions from:

Config

Start with petalinux-config or petalinux-config --get-hw-description

Select Image Packaging Configuration ==> Root filesystem type ==> Select SD Card

Changes:

U-Boot

Start with petalinux-config -c u-boot

Changes:

Device Tree

/include/ "system-conf.dtsi"
/ {
  chosen {
    	xlnx,eeprom = &eeprom;
		bootargs= "console=ttyPS0,115200 earlycon clk_ignore_unused earlyprintk root=/dev/mmcblk1p2 rootfstype=ext4 rw rootwait cma=1024M";
		/* notes: root=/dev/mmcblk1p2 for SD and root=/dev/sda for hard disk will be changed automatically by executing the debian/ubuntu script*/
  };
};

/* notes:
serdes: // PHY TYP see: dt-bindings/phy/phy.h
*/

/* default */

/* SD */

&sdhci1 {
	disable-wp;
	no-1-8-v;

};




/* USB  */


&dwc3_0 {
    status = "okay";
    dr_mode = "host";
    snps,usb3_lpm_capable;
    snps,dis_u3_susphy_quirk;
    snps,dis_u2_susphy_quirk;
    phy-names = "usb2-phy","usb3-phy";
    phys = <&lane1 4 0 2 100000000>;
    maximum-speed = "super-speed";
};

/* ETH PHY */

&gem3 {
	phy-handle = <&phy0>;
	phy0: phy0@1 {
		device_type = "ethernet-phy";
		reg = <1>;
	};
};

/* QSPI */

&qspi {
    #address-cells = <1>;
    #size-cells = <0>;
    status = "okay";
    flash0: flash@0 {
        compatible = "jedec,spi-nor";
        reg = <0x0>;
        #address-cells = <1>;
        #size-cells = <1>;
    };
};

/* I2C */

&i2c0 {
    i2cswitch@73 { // u
        compatible = "nxp,pca9548";
        #address-cells = <1>;
        #size-cells = <0>;
        reg = <0x73>;
        i2c-mux-idle-disconnect;
        i2c@0 { // MCLK TEBF0808 SI5338A, 570FBB000290DG_unassembled
            #address-cells = <1>;
            #size-cells = <0>;
            reg = <0>;
        };
        i2c@1 { // SFP TEBF0808 PCF8574DWR
            #address-cells = <1>;
            #size-cells = <0>;
            reg = <1>;
        };
        i2c@2 { // PCIe
            #address-cells = <1>;
            #size-cells = <0>;
            reg = <2>;
        };
        i2c@3 { // SFP1 TEBF0808
            #address-cells = <1>;
            #size-cells = <0>;
            reg = <3>;
        };
        i2c@4 {// SFP2 TEBF0808
            #address-cells = <1>;
            #size-cells = <0>;
            reg = <4>;
        };
        i2c@5 { // TEBF0808 EEPROM
            #address-cells = <1>;
            #size-cells = <0>;
            reg = <5>;
            eeprom: eeprom@50 {
	            compatible = "atmel,24c08";
	            reg = <0x50>;
	          };
        };
        i2c@6 { // TEBF0808 FMC  
            #address-cells = <1>;
            #size-cells = <0>;
            reg = <6>;
        };
        i2c@7 { // TEBF0808 USB HUB
            #address-cells = <1>;
            #size-cells = <0>;
            reg = <7>;
        };
    };
    i2cswitch@77 { // u
        compatible = "nxp,pca9548";
        #address-cells = <1>;
        #size-cells = <0>;
        reg = <0x77>;
        i2c-mux-idle-disconnect;
        i2c@0 { // TEBF0808 PMOD P1
            #address-cells = <1>;
            #size-cells = <0>;
            reg = <0>;
        };
        i2c@1 { // i2c Audio Codec
            #address-cells = <1>;
            #size-cells = <0>;
            reg = <1>;
			/*
            adau1761: adau1761@38 {
                compatible = "adi,adau1761";
                reg = <0x38>;
            };
			*/
        };
        i2c@2 { // TEBF0808 Firefly A
            #address-cells = <1>;
            #size-cells = <0>;
            reg = <2>;
        };
        i2c@3 { // TEBF0808 Firefly B
            #address-cells = <1>;
            #size-cells = <0>;
            reg = <3>;
        };
        i2c@4 { //Module PLL Si5338 or SI5345
            #address-cells = <1>;
            #size-cells = <0>;
            reg = <4>;
        };
        i2c@5 { //TEBF0808 CPLD
            #address-cells = <1>;
            #size-cells = <0>;
            reg = <5>;
        };
        i2c@6 { //TEBF0808 Firefly PCF8574DWR
            #address-cells = <1>;
            #size-cells = <0>;
            reg = <6>;
        };
        i2c@7 { // TEBF0808 PMOD P3
            #address-cells = <1>;
            #size-cells = <0>;
            reg = <7>;
        };
    };
};

Kernel

Start with petalinux-config -c kernel

Changes:

Rootfs

Applications will be generated with Debian script or Ubuntu script (mkdebian_stretch.sh/mkubuntu_BionicBeaver.sh)

Applications

Applications will be generated with Debian script or Ubuntu script (mkdebian_stretch.sh/mkubuntu_BionicBeaver.sh)

Additional Software

Note:
  • Add description for other Software, for example SI CLK Builder ...
  • SI5338 and SI5345 also Link to:

No additional software is needed.

SI5345

File location <design name>/misc/Si5345/Si5345-*.slabtimeproj

General documentation how you work with these project will be available on Si5345

Appx. A: Change History and Legal Notices

Document Change History

To get content of older revision  got to "Change History"  of this page and select older document revision number.

  • Note this list must be only updated, if the document is online on public doc!
  • It's semi automatically, so do following
    • Add new row below first

    • Copy "Page Information Macro(date)" Macro-Preview, Metadata Version number, Author Name and description to the empty row. Important Revision number must be the same as the Wiki document revision number Update Metadata = "Page Information Macro (current-version)" Preview+1 and add Author and change description. --> this point is will be deleted on newer pdf export template

    • Metadata is only used of compatibility of older exports


DateDocument Revision

Authors

Description

  • 2019.2 release
--all

--


Legal Notices