TE0320 is provided with a slide switch S2.

Figure 33: Slide switch S2 (angle view).
Slide switch S2 conditions the value of signal PS_EN.

• When slide switch S2 is in the left position (FX2 PON = power rails conditionally on depending on signal FX2_PS_EN), signal PS_EN is set to signal FX2_PS_EN driven by the EZ-USB FX2LP USB FX2 microcontroller under user control.
  
  Figure 34: Slide switch S2 schematic.
  
  
  Figure 35: When slide switch S2 = FX2 PON, signal PS_EN is set to signal FX2_PS_EN driven by the EZ-USB FX2LP USB FX2 microcontroller under user control.
• Signal PS_EN enables (high) or disables (low) power rails 2.5V and 1.2V.
  
  Figure 36: Power rails 2.5V and 1.2V
  
• According to the corresponding assembly option, power rail VCCCIO0 can depend or not on the 2.5V power rail.
  
  Figure 37: example of VCCIO0 assembly not dependent on 2.5V power rail. The other way is also possible.

• Power-rail 3.3V is not controlled by signal PS_EN and is unconditionally enabled. 
   
  

Table 14 summarizes all switching options implied by slide switch S2 under the standard assembly option.

Table 14: Slide switch S2 settings overview.