TE0300 is provided with the following slide switches:
TE0320 is provided with the following slide switches:
TE0630 is provided with the following slide switches:
EEPROM switch (EEPROM enabled: connection between EEPROM and USB FX2 microcontroller):
For all the switches above EEPROM is enabled when the switch is ON and the EEPROM is disabled when the switch is OFF. |
EEPROM switch is ON by default, to allow the USB FX2 microcontroller to read the serial EEPROM and enumerate as a custom/specific USB device.
|
Power Rails Configuration:
Master Reset (aka Reset Line):
FPGA Configuration selection (SPI+Jtag or only JTAG):
FPGA Configuration selection (Mode Pins):