View Source

Double click set_0xxx_project.bat to select the corresponding FPGA mounted on TE module.

Double click the system.xmp in "C:\XilinxProject\reference-TE0xxx".

The Xilinx Platform Studio should open.

You should click "Project" and then click "Project Options".

TE USB Suite > TE USB Reference Design Test > XPSProjectProjectOption.jpg

Under "Advanced Options (Optional) > Project Peripheral Repository Search Path" you must write (if it is not already written) "..TE-EDK-IP\".

TE USB Suite > TE USB Reference Design Test > XPSProjectProjectOption2.jpg

You should not alter folder nesting or select MyProcessorIPLib because double nesting of folders is a Xilinx Platform Studio requirements

After this selection the XPS should appear like in this image.

TE USB Suite > TE USB Reference Design Test > XPSXilinxProject_reference-TE0300_system.jpg

Now, you can cancel (or move in another folder) the content of TE0xxx-Reference-Designs\reference-TE0xxx\SDK\SDK_Export.

You can copy all .c and .h files from TE0xxx-Reference-Designs\reference-TE0xxx\SDK\SDK_Workspace\demo\src in a temporary folder (C:\demo_src_TE for example).

You can cancel all files and folders from TE0xxx-Reference-Designs\reference-TE0xxx\SDK\SDK_Workspace.

⁽¹⁾xxx is

300 for TE0300 project: unfortunately they are in the same folder TE03xx
320 for TE0320 project: unfortunately they are in the same folder TE03xx
630 for TE0630 project