OpenFutNet is a Trenz Electronic C# application.
It can be downloaded from
here
.
It can be used for:
Firmware Upgrade
(USB EEPROM and USB RAM programming): you should use a
.iic file (EZ-USB FX2LP USB FX2 microcontroller firmware)
;
Firmware Recovery
(USB EEPROM and USB RAM programming): you should use a
.iic file (EZ-USB FX2LP USB FX2 microcontroller firmware)
;
FPGA Configuration
(SPI Flash and FPGA programming): both .bit and .mcs file formats for both Xilinx Platform and third-party SPI Flash memories are supported.