EN:
Before mounting the KK0807-02, apply at least approx. 2mm GapFiller to the following areas:
The LED D1 must remain free and must not be covered by GapFiller.
DE:
Vor der Montage des KK0807-02 wird auf folgende Stellen mindestens ca. 2mm GapFiller aufgetragen:
Die Leuchtdiode D1 muss frei bleiben und darf nicht von GapFiller verdeckt werden.
Set the torque screwdriver at the assembly station to 0.5Nm.
Insert the PH1 Philips crosshead bit and fix it crosswise from below with four M3x6mm pan-head screws.