Download PDF version of this document.



CompanyTrenz Electronic GmbH
PCN NumberPCN-20210120a
TitleTE0715-04 DDR3 and Flash Change
SubjectBOM change
Issue Date

(2021-01-20), Revised 2021-03-09

Products Affected

This change affects all Trenz Electronic TE0715 SoMs of revision 04: TE0715-04-*

Affected Product

Replacement
TE0715-04-12S-1CTE0715-04-21C33-A
TE0715-04-15-1ITE0715-04-51I33-A
TE0715-04-15-1I3TE0715-04-51I33-L
TE0715-04-15-2ITE0715-04-52I33-A
TE0715-04-30-1CTE0715-04-71C33-A
TE0715-04-30-1ITE0715-04-71I33-A
TE0715-04-30-1IATE0715-04-71I33-A
TE0715-04-30-1I3TE0715-04-71I33-L
TE0715-04-30-3ETE0715-04-73E33-A
TE0715-04-15-1ICTE0715-04-51I33-AN

Changes

#1 Change DDR3 RAM (U12, U13) from IM4G16D3FABG-125I to IS43TR16256BL-125KBLI

Type: BOM change
Reason: Component is end of life.
Impact: New DDR timings may be considered in designs. DDR3 setup used in reference design is known to work still.

#2 Replaced Flash (U14) from S25FL256SAGBHI20 to IS25LP512M-RHLE

Type: BOM change
Reason: Ensure long time availability.
Impact: Jedec Manufacturer ID changed from 01h to 9Dh, the device ID from 18h to 19h. 512Mbit flash are now available. 

Type: No change
Reason: The planned IS25LP512M-RHLE is listed as 'Supported Flash Memory Devices for Zynq-7000 Device Configuration' in Xilinx UG908 (since version 2019.1), but there are unsolved problems with reboot after petalinux was started. Therefore this change is canceled.
Impact: Nothing is changed, Jedec Manufacturer ID is 01h, the device ID 0219h. Size does not change, 256 Mbit flash are available. 

#3 Clock Revision Change (U11, U15) SiT8008AI-... to SiT8008BI-...

Type: BOM change
Reason: Switch to actual revision. Revision A devices may be discontinued.
Impact: None. 

#4 Set S/N to not fitted

Type: BOM change
Reason: Part is end of life.
Impact: Track it pad no more available.

Method of Identification

Locate DDR3 RAM (U12 top, U13 bottom) on PCB:


oldnew

IM4G16D3FABG-125I

IS43TR16256BL-125KBLI


Production Shipment Schedule

TE0715-04-71I33-A variant will be available from end of March in parallel to the precursor. From end of Juli 2021, after old stock is gone, all variants above are replaced by the corresponding variants.


Contact Information

If you have any questions related to this PCN, please contact Trenz Electronics Technical Support at

Disclaimer

Any projected dates in this PCN are based on the most current product information at the time this PCN is being issued, but they may change due to unforeseen circumstances.  For the latest schedule and any other information, please contact your local Trenz Electronic sales office, technical support or local distributor.