Table of Content


TE Board Part Files


TE reference design scripts provide all necessary steps for a local board part installation and PS-Initialization. Reference Designs provide additional informations and instructions

General sescription of the reference design project delivery:

For manual Initialization use following description.


Zynq PS-Initialization (7Series/UltraScale+)

  1. Install Board Parts, see: Board Part Installation
  2. Create Project with Board Part
  3. Create Block-Design and add Zynq-Processing System
  4. Run Block Automation
  5. PS configuration is finished with basic Settings:
  6. (optional )Some Reference Design contains local extensions for some carrier depended configuration, located in the subfolder <board_parts>/. These Scripts must be source manually on the TCL-Console after "Block-Design Automation"