Download PDF version of this document.
|
Company | Trenz Electronic GmbH |
---|---|
PCN Number | PCN-20230705 |
Title | TE0703-06 to TE0703-07 Hardware Revision Change |
Subject | Hardware Revision Change |
Issue Date | 2023-10-13 |
This change affects all Trenz Electronic TE0703 SoMs: TE0703-07*.
Affected Product | Replacement |
---|---|
TE0703-06 | TE0703-07 |
Type: BOM Change
Reason: Improve manufacturing process.
Impact: Connector no longer available within product. If needed, connector needs to be ordered separately (Trenz article number 21545).
Type: Schematic Change
Reason: EOL of Component.
Impact: None. Increased current output capability. Minor changes in electrical characteristics.
Type: Schematic Change
Reason: BOM Optimization.
Impact: None. Increased current output capability. Minor changes in electrical characteristics.
Type: Schematic Change
Reason: Improve signal identification.
Impact: None.
Type: Schematic Change
Reason: Use new clock revision.
Impact: None.
Type: Schematic Change
Reason: Follow USB specification.
Impact: Changed micro USB type B receptable to micro USB type AB receptable and mechanical component size. Reduced current capability.
Type: Schematic Change
Reason: EOL of Component.
Impact: Mechanical component size increased and push/pull changed to push/push.
Type: Schematic Change
Reason: Improve manufacturing process.
Impact: None.
Type: Schematic Change
Reason: Enable external pull-up option.
Impact: Firmware reflects it but custom firmware needs to be updated by customer.
Type: Schematic Change
Reason: Improve decoupling.
Impact: None.
Type: PCB Change
Reason: Improve voltage monitoring.
Impact: None.
Type: Schematic Change
Reason: BOM Optimization.
Impact: None.
Type: Schematic Change
Reason: BOM Optimization.
Impact: None.
Type: Schematic Change
Reason: BOM Optimization.
Impact: None.
Type: Schematic Change
Reason: BOM Optimization.
Impact: None.
Type: Schematic Change
Reason: BOM Optimization.
Impact: None.
Type: Schematic Change
Reason: Use standard fiducials.
Impact: None.
Type: Schematic Change
Reason: EOL of Component.
Impact: None.
Type: PCB Change
Reason: Required for export to UK.
Impact: None.
Type: PCB Change
Reason: Updated contact information.
Impact: None.
Type: Schematic Change
Reason: Use latest component data.
Impact: None.
Type: Documentation Update
Reason: Documentation improvement.
Impact: None.
The revision number is shown on the top side of the PCB. Revision number position changes between REV06 and REV07 on top side of the PCB.
This change takes place with immediate effect. If the new revision is not suitable for your application and still the former revision of the board is needed, please contact us.
If you have any questions related to this PCN, please contact Trenz Electronics Technical Support at
phone
national calls: 05741 3200-0
international calls: 0049 5741 3200-0
Any projected dates in this PCN are based on the most current product information at the time this PCN is being issued, but they may change due to unforeseen circumstances. For the latest schedule and any other information, please contact your local Trenz Electronic sales office, technical support or local distributor.
This PCN follows JEDEC Standard J-STD-046.