Table of contents

CPLD Access  

Set B2B Pin JM1-89 (JTAGEN) to VDD (3.3V)

With modified TE0703 and TE0703 default CPLD firmware:

1. Connect MiniUSB cable to J4
2. Set DIP Switch S2-2 to OFF and S2-3 to ON position, see TE0703 CPLD - CC703S#CC703S-JTAG
3. Power ON the board
4. Run "Lattice Diamond Programmer"

5. Select "Create new project from JTAG chain" and press "OK"

Available CPLD Firmware

• TEM0007 CPLD - Firmware description
  
  • Default delivered Firmware

Download

• TEM0007/<PCB Revision>/Firmware/
  • Use files from the subfolders of your PCB revision

General instructions