Note

The mounting of the heatspreader must be done with care. We do not take over guarantee for self-assembly.

Compatibility

This heatspreader can be mounted on all TE803 Revision 4 and TE0803 Revision 3 (TE0803-03-…).

Is compatible with the following accessories:

• KK0001-01 Cooling fin attachment.
• 33663 – SZ12L, 12V, Radian Sub-Zero PCIe Fansink, 50 × 64 × 10.5 mm Set
• 33664 – SZ05L, 5V, Radian Sub-Zero PCIe Fansink, 50 × 64 × 10.5 mm Set 

Accessories

Gap Filler: Berquist GF3500S35-00-60-50CC

Gun: 50CC MANUAL GUN 1:1 RATIO SS95407

Tool: PH1 Philips crosshead torque screwdriver

Assembly

1. Apply Gap Filler in at least approx. 2 mm thickness to the following components:
   
2. Carefully align the heatspreader and press it lightly.
   

3. Set the torque screwdriver to 0.5Nm / 4.5 inlb.

4. Insert the Philips crosshead bit PH1.

5. Fasten the heatspreader crosswise from below with the four M3 × 6 mm pan-head screws.
   (Fig. TE0808-05, similar.)