The mounting of the heatspreader must be done with care. We do not take over guarantee for self-assembly.
This heatspreader can be mounted on all TE0817 Revision 1 (TE0817-01-…)
Is compatible with the following accessories:
Gap Filler: Berquist GF3500S35-00-60-50CC
Gun: 50CC MANUAL GUN 1:1 RATIO SS95407
Tool: PH1 Philips crosshead torque screwdriver
Set the torque screwdriver to 0.5Nm / 4.5 inlb.
Insert the Philips crosshead bit PH1.
Fasten the heatspreader crosswise from below with the four M3 × 6 mm pan-head screws.