Additional Master Pinout Viewer/XDC-Generator is available on Trenz Electronic Download - Pinout
| Group | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | |||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Modul | Bank | IOs | TYP | IO-Voltage | Bank | IOs | TYP | IO-Voltage | Bank | IOs | TYP | IO-Voltage | Bank | IOs | TYP | IO-Voltage | Bank | IOs | TYP | IO-Voltage | Bank | IOs | TYP | IO-Voltage | Bank | IOs | TYP | IO-Voltage | |
| TE0710 | B15 | 48 | HR | VCCIOA | - | - | - | - | - | - | - | - | B34 | 50 | HR | VCCIOD | B16 | 6 | HR | 3.3V | B14 | 8 | HR | 3.3V | 2x 100Mbit ETH | ||||
| TE0711 | B15 | 48 | HR | VCCIOA | B34 | 36 | HR | VCCIOB | B14 | 18 | HR | 3.3V | B35 | 50 | HR | VCCIOD | B16 | 6 | HR | 1.8V | B14 | 8 | HR | 3.3V | B34 | 8 | HR | VCCIOB | |
| TE0712 | B16 | 48 | HR | VCCIOA | B13 | 20 | HR | VCCIOB | B14 | 18 | HR | 3.3V | B15 | 50 | HR | VCCIOD | B13 | 6 | HR | VCCIOB | B14 | 8 | HR | 3.3V | 1x 100Mbit ETH / B13 | 4 | HR | VCCIOB | |
| TE0715-xx-15 | B13 | 48 | HR | VCCIOA | B34 | 16 | HR | VCCIOC | B34 | 18 | HR | VCCIOC | B35 | 40 | HR | VCCIOD | B501 | 6 | MIO | 1.8V | B500 | 8 | MIO | 3.3V | 1x Gbit ETH | SGMII | |||
| TE0715-xx-30 | B13 | 48 | HR | VCCIOA | B34 | 16 | HP | VCCIOC | B34 | 18 | HP | VCCIOC | B35 | 40 | HP | VCCIOD | B501 | 6 | MIO | 1.8V | B500 | 8 | MIO | 3.3V | 1x Gbit ETH | SGMII | |||
| TE0720 | B35 | 48 | HR | VCCIOA | B34 | 36 | HR | VCCIOB | B33 | 18 | HR | VCCIOC | B13 | 50 | HR | VCCIOD | B501 | 6 | MIO | 1.8V | B500 | 8 | MIO | 3.3V | 1x Gbit ETH | SGMII | |||
| TE0820* | B25/B26 | 48 | HD | VCCIOA | B64 | 50 | HR | VCCIOD | 6 | MIO | 1.8V | 8 | MIO | 3.3V | 1x Gbit ETH | ||||||||||||||
| TE0741 | B13 | 48 | HR | VCCIOA | B16 | 16 | HR | VCCIOB | B15 | 18 | HR | VCCIOC | B12 | 50 | HR | VCCIOD | GTX | 1 Lane | B14 | 8 | HR | 3.3V | GTX | 2 Lanes | GTX | ||||
| TE0742* | |||||||||||||||||||||||||||||
| TE0841 | B64 | 48 | HR | VCCIOA | B66 | 18 | HP | VCCIOB | B68 | 18 | HP | VCCIOC | B67 | 50 | HP | VCCIOD | GTH | 1 Lane | B65 | 8 | HR | 3.3V | GTH | 2 Lanes | GTH | ||||
| TE0842* | |||||||||||||||||||||||||||||
I/O resource comparison for all 4x5 modules. There are maximum 4 user supplied I/O voltages (VCCIOA, VCCIOB, VCCIOC, VCCIOD).
Attention: Maximum power supply for HP-Banks is 1.8V.
| IO Voltage | B2B Connector | Carrier Boards | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Name | Direction | JB1 | JB2 | TE0701 | TE0703 Rev1-Rev4 | TE0703 Rev5 | TE0705 | TE0706 | |||||
| Pin | Pin | Schematic Name | Value,Option,Comp. | Schematic Name | Value,Option,Comp. | Schematic Name | Value,Option,Comp. | Schematic Name | Value,Option,Comp. | Schematic Name | Value,Option,Comp. | ||
| PWR_1 | out | 2,4,6 | 1,3,5,7 | 5V0 | 5V | 3.3V | 3.3V | 3.3V | 3.3V | 5V0 | 5V | 3.3V | 3.3V |
| VCCIOA | out | 10,12 | VIOTB | FMC_VADJ/2V5/3.3VOUT | VCCIO35 | R23→M3.3VOUT / J1B-B1 | VCCIOA | J5→M3.3VOUT,M1.8VOUT / R23→M3.3VOUT / J1-B1 | VIOTB | FMC_VADJ/2V5/3.3VOUT | VCCIO35 | R20->M3.3VOUT/J6B-B32 | |
| VCCIOD | out | 8,10 | VIOTB | FMC_VADJ/2V5/3.3VOUT | VCCIO13 | R26→M3.3VOUT / J2B-B1 | VCCIOD | J10→M3.3VOUT,M1.8VOUT / R26→M3.3VOUT / J2B-B1 | VIOTB | FMC_VADJ/2V5/3.3VOUT | VCCIO13 | R22->M3.3VOUT/J6B-B1 | |
| PWR_2 | out | 14,16 | 3V3IN | 3.3V | 3.3V | 3.3V | 3.3V | 3.3V | 3V3IN | 3.3V | 3.3V | 3.3V | |
| VCCIOB | out | 2,4 | no name | FMC_VADJ/2V5/3.3VOUT | VCCIO34 | J5→M3.3VOUT / J1B-B32 | VCCIOB | J8→M3.3VOUT,M1.8VOUT / J2B-B32 | VIOTB | FMC_VADJ/2V5/3.3VOUT | 1.8V | 1.8V | |
| VCCIOC | out | 6 | no name | FMC_VADJ/2V5/3.3VOUT | VCCIO33 | R25→M3.3VOUT / J2B-B32 | VCCIOC | J9→M3.3VOUT,M1.8VOUT / R25→M3.3VOUT / J2B-B32 | VIOTB | FMC_VADJ/2V5/3.3VOUT | VCCIO33 | R21->M3.3VOUT | |
| PWR_M1 | in | 9,11 | 3.3VOUT | 3.3V | 3.3VOUT | 3.3V | M3.3VOUT | 3.3V | 3.3VOUT | 3.3V | M3.3VOUT | 3.3V | |
| PWR_M2 | in | 40 | VIOB | 1.8V | M1.8VOUT | 1.8V | M1.8VOUT | 1.8V | VIOB | 1.8V | M1.8VOUT | 1.8V | |
| PWR_VBAT | out | 80 | VBAT | B1 | VBAT | J7 | VBAT | J7 | NC | VBAT | J9 | ||
| PWR_JTAG | in | 92 | VCCJTAG | VCCJTAG | VCCJTAG | VCCJTAG | VCCJTAG | ||||||
Power comparison for all 4x5 carrier boards. Power direction based on carrier boards view.There are 4 variable user supplied I/O voltages (VCCIOA, VCCIOB, VCCIOC, VCCIOD). PWR_1, PWR_2 are fixed from carrier boards. PWR_M1, PWR_M2 used normally default value from module.
Attention: On some Carrier-Boards user supplied I/O voltages are connected together (Red schematic names).