Download PDF version of this document. |
Table of Contents |
Refer to "https://shop.trenz-electronic.de/de/Download/?path=Trenz_Electronic/TE0722/REV02/Documents" for downloadable version of this manual and additional technical documentation of the product. |
The Trenz Electronic TE0722-02 is a DIPFORTy1 "Soft Propeller" based on the Xilinx ZYNQ-7000 SoC.
Additional assembly options are available for cost or performance optimization upon request.
Storage device name | Content | Notes |
---|---|---|
QSPI Flash | Empty |
On-board I2C interface is provided via ZYNQ SoC PS bank 501 pins MIO36 (SCL) and MIO37 (SDA). I2C addresses for on-board devices are listed in the table below:
I2C Device | I2C Address | Notes |
---|---|---|
Si1143-A11-GMR | 0x5A |
JTAG access to the Xilinx ZYNQ XC7Z010 SoC is provided through J2 connector.
JTAG Signal | J2 Connector Pin |
---|---|
TCK | 4 |
TDI | 9 |
TDO | 10 |
TMS | 8 |
LED | Color | Connected To | Description and Notes |
---|---|---|---|
D1 | Red | LED2, U4 | |
D2 | Green | MIO7, U1 | User controlled, default OFF (when PS7 has not been booted). |
D3 | Red | LED1, U4 | |
D4 | RGB | RGB_R, U1 RGB_G, U1 RGB_B, U1 | |
D5 | Red | LED3, U4 | |
D6 | Green | DONE, U1 | Reflects inverted DONE signal. ON when FPGA is not configured, OFF as soon as PL is configured. |
MIO | Function | Connector Pin | Notes |
---|---|---|---|
1 | QSPI | - | SPI Flash-CS |
2 | QSPI | - | SPI Flash-DQ0 |
3 | QSPI | - | SPI Flash-DQ1 |
4 | QSPI | - | SPI Flash-DQ2 |
5 | QSPI | - | SPI Flash-DQ3 |
6 | QSPI | - | SPI Flash-SCK |
7 | GPIO | - | Green LED D2 |
28 | J8-5 | CLK | |
29 | J8-3 | CMD | |
30 | J8-7 | DAT0 | |
31 | J8-8 | DAT1 | |
32 | J8-1 | DAT2 | |
33 | J8-3 | CD/DAT3 | |
36 | I2C | - | SCL |
37 | I2C | - | SDA |
39 | GPIO | - | Si1143 INT pin |
49 | J8-G4 | Card detect switch |
Parameter | Min | Max | Units | Reference Document |
---|---|---|---|---|
VIN supply voltage | -0.5 | 3.6 | V | Xilinx datasheet DS187, "Zynq-7000 All Programmable SoC: DC and AC Switching Characteristics". |
Storage temperature | -40 | +85 | °C | Silicon Labs Si1141/42/43 datasheet. |
Parameter | Min | Max | Units | Reference Document |
---|---|---|---|---|
Supply voltage | 1.14 | 3.465 | V | Xilinx datasheet DS187, "Zynq-7000 All Programmable SoC: DC and AC Switching Characteristics". |
Operating temperature | 0 | +85 | °C | Commercial range devices. |
Operating temperature | -40 | +100 | °C | Industrial range devices. |
Assembly variants for higher storage temperature range are available on request. |
Module size: 18 mm × 51 mm. Please download the assembly diagram for exact numbers.
PCB thickness: 1.6 mm.
Highest part on PCB: approx. 4 mm. Please download the step model for exact numbers.
All dimensions are given in millimeters.
Commercial grade: 0°C to +70°C.
Industrial grade: -40°C to +85°C.
Operating temperature range depends also on customer design and cooling solution. Please contact us for options.
... g - Plain module
... g - Set of bolts and nuts
Date | Revision | Notes | PCN | Documentation Link |
---|---|---|---|---|
2015-10-23 | 02 | |||
01 |
|
Hardware revision number is printed on the PCB board together with the module model number separated by the dash.
Date | Revision | Contributors | Description |
---|---|---|---|
2017-02-09 | Jan Kumann | Initial document. |