5.2 x 7.6 cm modules use three or four Samtec Razor Beam LP Terminal/Socket Strip (ST5) on the bottom side.
When using the same type on baseboard, the mating height is 5 mm.
Other mating heights are possible by using connectors with a different height:
| Connector on baseboard | compatible to | Mating height |
|---|---|---|
| REF192552-01 | SS5-80-3.50-L-D-K-TR | 5 mm |
| ||
| ||
| ||
| ||
| ||
| ||
|
The module can be manufactured using other connectors upon request.
The connector speed rating depends on the stacking height:
Stacking height | Speed rating |
|---|---|
| 4 mm, Single-Ended | 13GHz/26Gbps |
| 4 mm, Differential | 13.5GHz/27Gbps |
| 5 mm, Single-Ended | 13.5GHz/27Gbps |
| 5 mm, Differential | 20GHz/40 Gbps |
The SS5/ST5 series board-to-board spacing is currently available in 4mm (0.157"), 4.5mm (0.177") and 5mm (0.197") stack heights.
The data in the reports is applicable only to the 4mm and 5mm board-to-board mated connector stack height.
Catalogue page http://suddendocs.samtec.com/catalog_english/ss5.pdf
Test data, schematic, PADS/ORCAD Library etc. available at www.samtec.com?SS5
--------------------------------