This Trenz Electronic Starter Kit consists of a TE0808 module on a TEBF0808 base board in Mini-ITX Enclosure. See Shop Link for detailed content.
TE0808 UltraSOM+ - Wiki with TRM, reference projects, application notes and more
TE0790-XMOD FTDI JTAG Adapter - Wiki with settings and configurations
Vivado/SDK/SDSoC - Short instructions for Vivado, SDK, SDSoC
Project Delivery - General descriptions of reference designs and content
TE0808 Download Area - contains various reference designs, schematics, hardware designs, 3D models and more
TEBF0808 Download Area - contains schematics, hardware designs, 3D models and more
TE0790-XMOD Download Area - contains firmware with projects, schematics, hardware designs, 3D models and more
TE Master Pinout - Excel Sheet as Pinout-Viewer and XDC-Generator
Shop TE0808-Starter-Kit - contains prices, order number, content...
Vivado Design Suite - Xilinx Design Software with JTAG drivers and documentation
Xilinx Download Area - All Xilinx Software, Device Models and Libraries
|WARNING: Do not change XMOD DIP-Switch settings on TEBF0808. Do not swap the XMOD adapters the one marked with green dot must be closer to the SoM|
Connect mains power and set power switch to on.
For ES1 only:
Starter Kit will be shipped with all cable connected.
For support, please go to http://forum.trenz-electronic.de/ or contact email@example.com