Introduction

This User Manual describes the Electronic Drive Development Platform (EDDP).

None of the EDDP components are intended to be used in finished products. All the software and hardware parts of the Platform are intended for Developers evaluating Motor Control Applications with Xilinx FPGA and/or SoC Devices.

Requirements

Xilinx SDSoC 2017.1 for SDSoC Design Flow or
Xilinx Vivado 2017.1 for HLS Design Flow
PC that satisfies the host workstation requirements for Xilinx Tools
Controller Board (Default: Digilent ARTY-Z 7010)
- Micro-USB Cable (not included in the EDDP kit)
- RJ45 ethernet Cable (not included in the EDDP kit)
- 12V Wall supply for Controller board (included in EDDP kit)
- microSD Card (included in the EDDP kit)
EDPS Drive Board TEC0053 (Default: 2 phase measurement, max 25A)
- EDPS Motor Adapter Board TEC0060 with default Motor/Encoder installed and 12V Wall supply or
- Custom Motor and Encoder with cables and DC Link power source
Experience with Xilinx SDSoC and/or Xilinx Vivado. Pre-requisites: basic knowledge of Xilinx All Programmable FPGA and/or SoC devices, basic knowledge of Xilinx SDK and C/C++ programming

Installation

todo

EDDP System - TODO

Hardware - TODO

Software

The user interface is a Web application:

Public Docs > EDDP User Manual > uiscreenshot.png

Motor - TODO

Block Diagram - TODO

Functional description - TODO

Control Board

The default Control Board is the Digilent ARTY-Z 7010, which is delivered as part of the EDDP Kit. This manual contains information relevent to the actual use of the ARTY-Z as a Control Board within the EDDP only; all technical data and user guides and manuals for the Controller Board are provided by the controller board manufacturer.