Introduction

This User Manual describes the Electronic Drive Development Platform (EDDP).

None of the EDDP components are intended to be used in finished products. All the software and hardware parts of the Platform are intended for Developers evaluating Motor Control Applications with Xilinx FPGA and/or SoC Devices.

Requirements

The following is required in addition to what is supplied in the EDDP Kit:

A PC capable of running the Xilinx SDSoC 2017.1.
Basic knowledge of Xilinx All Programmable FPGA and/or SoC devices, basic knowledge of Xilinx SDK and C/C++ programming in order to be able to adapt the firmware to your requirements.
Micro-USB Cable for the USB console of the Controller Board.
Ethernet-based LAN with a DHCP server and a RJ45 ethernet Cable in order to access the Web UI.

The following is optional:

Custom Controller Board.
Custom motor and encoder.
Power supply DC 5..48V to suit the custom motor power requirements.

Installation

todo

EDDP System - TODO

Hardware - TODO

Software

The user interface is a Web application:

Public Docs > EDDP User Manual > uiscreenshot.png

The interface lets one to operate the motor in one of the following modes:

Speed control.
Stator current I_q control.

Motor

The default motor is supplied in the EDDP Kit; see the chapter Reference Motor for details

A custom motor must be a three-phase synchronous motor with a quadrature encoder (either single-ended or differential outputs) in order to be able to controlled with the default firmware supplied.

Block Diagram - TODO

Functional description - TODO

Control Board

The default Control Board is the Digilent ARTY-Z 7010, which is delivered as part of the EDDP Kit. This manual contains information relevent to the actual use of the ARTY-Z as a Control Board within the EDDP only; all technical data and user guides and manuals for the Controller Board are provided by the controller board manufacturer.