Table of contents

CPLD Access  

Set B2B Pin J1-148 (JTAG_EN) to VDD (3.3V).

With TEB0745:

• Set DIP S2-2 to ON

Available CPLD Firmware

• TE0745 CPLD - Firmware with different Boot mode variants
  
  • QSPI/SD
    • default delivered firmware
    • Boot mode can be changed between QSPI or SD with B2B J2-133 Pin (BOOTMODE/ Zynq (MIO4)).
  • QSPI/SD/JTAG
    • optional firmware
    • Boot mode depends on MIO0 (sd card detection) connected to B2B J2-137 Pin (SD card detection/ Zynq (MIO0))
      • sd card detected: Boot mode can be changed between QSPI or SD with B2B J2-133 Pin (BOOTMODE/ Zynq (MIO4)).
      • no sd card detected: Boot mode can be changed to JTAG with B2B J2-133 Pin (BOOTMODE/ Zynq (MIO4)).

Download

• TE0745/<PCB Revision>/Firmware/
  • Use files from the subfolders of your PCB revision

General instructions