Template Revision 2.3
TRM Name always "TE Series Name" +TRM, for example "TE0720 TRM" |
<!-- tables have all same width (web max 1200px and pdf full page(640px), flexible width or fix width on menu for single column can be used as before) -->
<style>
.wrapped{
width: 100% !important;
max-width: 1200px !important;
}
</style> |
----------------------------------------------------------------------- |
Note for Download Link of the Scroll ignore macro: |
Table of Contents |
Overview
Trenz Electronic TE0728 is an automotive-grade FPGA module integrating a Xilinx Automotive Zynq-7000 FPGA, two 100 Mbit Ethernet transceiver (PHY) , 512 MByte DDR3L SDRAM, 16 MByte Flash memory for configuration and operation, and powerful switching-mode power supplies for all on-board voltages. Numerous configurable I/Os are provided via rugged high-speed strips.
Refer to http://trenz.org/te0728-info for the current online version of this manual and other available documentation.
Key Features
Notes : - Xilinx XA7Z020-1CLG484Q (Automotive)
- Rugged for shock and high vibration
- Dimensions: 6 x 6 cm
- Temperature range: automotive
- 2 x ARM Cortex-A9 MPCore
- 2 x 100 MBit Ethernet transceiver (PHY)
- 512 MByte DDR3L SDRAM, 16-bit-wide
- 16 MByte QSPI Flash memory (with XiP support)
- Plug-on module with 3 x 80-pin Samtec Micro Tiger Eye(TM) high-speed connectors
- 76 single ended I/O, 24 LVDS pairs (48 I/O) and 42 MIO available on board-to-board connectors
- CAN transceiver (PHY)
- 12 V power supply with watchdog
- On-board high-efficiency DC-DC converters
- System management and power sequencing
- eFUSE bit-stream encryption
- AES bit-stream encryption
- Temperature compensated RTC (real-time clock)
- 3 user LEDs
- Evenly-spread supply pins for good signal integrity
|
Block Diagram
add drawIO object here: Attention if you copy from other page, objects are only linked. |
image link to the generate drawIO PNG file of this page. This is a workaround until scroll pdf export bug is fixed |
|
Main Components
Notes : - Picture of the PCB (top and bottom side) with labels of important components
- Add List below
|
add drawIO object here: Attention if you copy from other page, objects are only linked. |
image link to the generate drawIO PNG file of this page. This is a workaround until scroll pdf export bug is fixed |
|
...
...
...
Initial Delivery State
Storage device name | Content | Notes |
---|
.. | .. | .. | OTP Flash area | Empty | Not programmed. |
|
Control Signals
- Overview of Boot Mode, Reset, Enables,
|
Signals, Interfaces and Pins
Notes : - For carrier or stand-alone boards use subsection for every connector typ (add designator on description, not on the subsection title), for example:
- For modules which needs carrier us only classes and refer to B2B connector if more than one is used, for example
|
Subsections...
On-board Peripherals
Notes : - add subsection for every component which is important for design, for example:
- Ethernet PHY
- USB PHY
- Programmable Clock Generator
- Oscillators
- eMMCs
- RTC
- FTDI
- ...
- DIP-Switches
- Buttons
- LEDs
|
Subsections...
Power and Power-On Sequence
Power Consumption
Power Distribution Dependencies
add drawIO object here: Attention if you copy from other page, objects are only linked. |
image link to the generate drawIO PNG file of this page. This is a workaround until scroll pdf export bug is fixed |
|
Power-On Sequence
Create DrawIO object here: Attention if you copy from other page, objects are only linked. |
image link to the generate DrawIO PNG file of this page. This is a workaround until scroll pdf export bug is fixed |
|
Voltage Monitor Circuit
Power Rails
Bank Voltages
Board to Board Connectors
- This section is optional and only for modules.
- use "include page" macro and link to the general B2B connector page of the module series, for example: 4 x 5 SoM LSHM B2B Connectors
|
Technical Specifications
Absolute Maximum Ratings
Parameter | Min | Max | Units | Reference Document |
---|
|
|
|
|
|
|
|
|
|
|
|
Recommended Operating Conditions
Parameter | Min | Max | Units | Reference Document |
---|
|
|
|
|
|
|
|
|
|
|
|
Physical Dimensions
Variants Currently In Production
Revision History
Hardware Revision History
Date | Revision | Note | PCN | Documentation Link |
---|
- | 01 | Prototypes | - | - |
|
|
|
|
|
|
Hardware revision number is printed on the PCB board next to the module model number separated by the dash.
Document Change History
- Note this list must be only updated, if the document is online on public doc!
- It's semi automatically, so do following
Add new row below first Copy "Page Information Macro(date)" Macro-Preview, Metadata Version number, Author Name and description to the empty row. Important Revision number must be the same as the Wiki document revision number Update Metadata = "Page Information Macro (current-version)" Preview+1 and add Author and change description. --> this point is will be deleted on newer pdf export template - Metadata is only used of compatibility of older exports
|
Date | Revision | Contributor | Description |
---|
| | | | -- | all | | |
|
Disclaimer