Template Revision 2.3
TRM Name always "TE Series Name" +TRM, for example "TE0720 TRM" |
<!-- tables have all same width (web max 1200px and pdf full page(640px), flexible width or fix width on menu for single column can be used as before) -->
<style>
.wrapped{
width: 100% !important;
max-width: 1200px !important;
}
</style> |
----------------------------------------------------------------------- |
Note for Download Link of the Scroll ignore macro: |
Table of Contents |
Overview
Trenz Electronic TE0728 is an automotive-grade FPGA module integrating a Xilinx Automotive Zynq-7020 FPGA, two 100 Mbit Ethernet transceivers (PHY) , 512 MByte DDR3L SDRAM, 16 MByte Flash memory for configuration and operation, and powerful switching-mode power supplies for all on-board voltages. Numerous configurable I/Os are provided via rugged high-speed strips.
Within the complete module only Automotive components are installed.
All this in a compact 6 x 6 cm form factor, at the most competitive price.
Refer to http://trenz.org/te0728-info for the current online version of this manual and other available documentation.
Key Features
Block Diagram
image link to the generate drawIO PNG file of this page. This is a workaround until scroll pdf export bug is fixed |
|
Main Components
Notes : - Picture of the PCB (top and bottom side) with labels of important components
- Add List below
|
add drawIO object here: Attention if you copy from other page, objects are only linked. |
image link to the generate drawIO PNG file of this page. This is a workaround until scroll pdf export bug is fixed |
|
...
...
...
Initial Delivery State
Storage device name | Content | Notes |
---|
.. | .. | .. | OTP Flash area | Empty | Not programmed. |
|
Control Signals
- Overview of Boot Mode, Reset, Enables,
|
Signals, Interfaces and Pins
Notes : - For carrier or stand-alone boards use subsection for every connector typ (add designator on description, not on the subsection title), for example:
- For modules which needs carrier us only classes and refer to B2B connector if more than one is used, for example
|
Subsections...
On-board Peripherals
Notes : - add subsection for every component which is important for design, for example:
- Ethernet PHY
- USB PHY
- Programmable Clock Generator
- Oscillators
- eMMCs
- RTC
- FTDI
- ...
- DIP-Switches
- Buttons
- LEDs
|
Subsections...
Power and Power-On Sequence
Power Consumption
Power Distribution Dependencies
add drawIO object here: Attention if you copy from other page, objects are only linked. |
image link to the generate drawIO PNG file of this page. This is a workaround until scroll pdf export bug is fixed |
|
Power-On Sequence
Create DrawIO object here: Attention if you copy from other page, objects are only linked. |
image link to the generate DrawIO PNG file of this page. This is a workaround until scroll pdf export bug is fixed |
|
Voltage Monitor Circuit
Power Rails
Power Rail Name | B2B Connector JM1 Pin | B2B Connector JM2 Pin | B2B Connector JM3 Pin | Direction | Notes |
---|
VIN | 1, 3 | - | - | Input |
|
3.3 | 19 | 2, 4 | - | Output |
|
1.8 | 39 | 5 | - | Output |
|
|
|
|
|
|
|
Bank Voltages
Board to Board Connectors
FPGA Bank | B2B Connector | I/O Signal Count | Voltage Level | Notes |
---|
13 | JM1 | 48 |
|
|
500 | JM1 | 4 |
|
|
33 | JM3 | 34 |
|
|
35 | JM3 | 20 |
|
|
35 | JM2 | 22 |
|
|
501 | JM2 | 38 |
|
|
Technical Specifications
Absolute Maximum Ratings
Parameter | Min | Max | Units | Reference Document |
---|
|
|
|
|
|
|
|
|
|
|
|
Recommended Operating Conditions
Parameter | Min | Max | Units | Reference Document |
---|
|
|
|
|
|
|
|
|
|
|
|
Physical Dimensions
Variants Currently In Production
Revision History
Hardware Revision History
Date | Revision | Note | PCN | Documentation Link |
---|
- | 01 | Prototypes | - | - |
|
|
|
|
|
|
Hardware revision number is printed on the PCB board next to the module model number separated by the dash.
Document Change History
- Note this list must be only updated, if the document is online on public doc!
- It's semi automatically, so do following
Add new row below first Copy "Page Information Macro(date)" Macro-Preview, Metadata Version number, Author Name and description to the empty row. Important Revision number must be the same as the Wiki document revision number Update Metadata = "Page Information Macro (current-version)" Preview+1 and add Author and change description. --> this point is will be deleted on newer pdf export template - Metadata is only used of compatibility of older exports
|
Date | Revision | Contributor | Description |
---|
| | | | -- | all | | |
|
Disclaimer