Template Revision 1.7 - on construction Design Name always "TE Series Name" + optional CPLD Name + "CPLD" |
<!-- tables have all same width (web max 1200px and pdf full page(640px), flexible width or fix width on menu for single column can be used as before) --> <style> .wrapped{ width: 100% !important; max-width: 1200px !important; } </style> |
Online version of this manual and other related documents can be found at https://wiki.trenz-electronic.de/display/PD/TEBF0808+CPLD+Firmware |
Table of contents |
Firmware for PCB-Master CPLD with designator U17. Use first CPLD Device in Chain: LCMX02-1200HC
Firmware for PCB-Slave CPLD with designator U39. Use second CPLD Device in Chain: LCMX02-1200HC
See Document Change History
todo list of both cplds
Name / opt. VHD Name | Direction | Pin | Bank Power | Description |
---|---|---|---|---|
JTAGENB set carrier board CPLD into the chain for firmware update. For Update set DIP S4-3 to ON.
FMC VADJ is handled on master CPLD.
DIP | Positon | Description |
---|---|---|
S5-4 | ON | 1.8V |
S5-4 | OFF | 1.2V |
Power on and off sequencing is done with slave CPLD.
todo description
Power, Zynq reset and PCIe is handle on Slave CPLD
USB, I2C Reset is handled on Master CPLD
todo description
todo (both)
todo (Master CPLD)
todo (Slave CPLD)
todo (SlaveCPLD)
todo (both)
todo (SlaveCPLD)
todo todo (Master CPLD)
todo (Master CPLD)
todo (Master CPLD)
todo todo (Master CPLD)
todo todo (Master CPLD)
todo todo (Master CPLD)
todo (both)
todo (both)
To get content of older revision got to "Change History" of this page and select older document revision number.
|
Date | Document Revision | CPLD Firmware Revision | Supported PCB Revision | Authors | Description |
---|---|---|---|---|---|
REV07 | REV03,REV04* |
| |||
2017-06-07 |
| ||||
All |