This Trenz Electronic Starter Kit consists of a TE0803 module on a TEBF0808 base board in Mini-ITX Enclosure. See shop link for detailed content.

Wiki Links

Download Links

Shop Links

Xilinx Software and Driver

Important Notes

Do not change XMOD DIP-Switch settings on TEBF0808. Do not swap the XMOD adapters, the one marked with a green dot must be closer to the SoM


ES devices are not included in all Vivado versions, for ES1 only:

activate beta device see: FAQ - How can I activate beta devices?


For all Starter Kits shipped before 2017-06-21:

Enclosure power and HD LED was swapped on connector. See "Enclosure Power Button, Reset Button, HDD LEDand Power LED" section for correct connection.

Getting Started

TEBF0808 Getting Started - Basic note to start up Carrier with TE080x modules

Starter Kit Basic

Main Power Enclosure Location

Power Button , Reset Button, HDD LED and Power LED Enclosure  Location


 Do not change XMOD DIP-Switch settings on TEBF0808. Do not swap the XMOD adapters, the one marked with a green dot must be closer to the SoM


TEBF0808

TE0790-02

(with green dot)

TE0790-02L


DIP-SchalterS4
S4.1OFF
S4.2OFF
S4.3OFF
S4.4ON



DIP-SchalterS5
S5.1ON
S5.2ON
S5.3OFF
S5.4OFF



 DIP-SchalterS1
S1.1ON
S1.2OFF
S1.3OFF
S1.4OFF



 DIP-SchalterS1
S1.1ON
S1.2OFF
S1.3OFF
S1.4OFF


Starter Kit will be shipped with all cable connected.

ATX Power

Module

FMC FAN

XMODs

Enclosure USB

Enclosure FAN1 and HDAUDIO

Enclosure Power Button , Reset Button, HDD LED and Power LED

Support