<!-- tables have all same width (web max 1200px and pdf full page(640px), flexible width or fix width on menu for single column can be used as before) -->
<style>
.wrapped{
width: 100% !important;
max-width: 1200px !important;
}
</style> |
Important General Note:- If some section is configurable and depends on Firmware, please refer to the addition page (for example CPLD). If not available, add note, that this part is configurable
- Designate all graphics and pictures with a number and a description, Use "Scroll Title" macro
- Use "Scroll Title" macro for pictures and table labels. Figure number must be set manually at the moment (automatically enumeration is planned by scrollPDF)
Figure template:
Create DrawIO object here: Attention if you copy from other page, objects are only linked. |
image link to the generate DrawIO PNG file of this page. This is a workaround until scroll pdf export bug is fixed |
|
- Table template:
- Layout macro can be use for landscape of large tables
- The anchors of the Scroll Title should be named consistant across TRMs. A incomplete list of examples is given below
- <type>_<main section>_<name>
- type: Figure, Table
- main section:
- "OV" for Overview
- "SIP" for Signal Interfaces and Pins,
- "OBP" for On board Peripherals,
- "PWR" for Power and Power-On Sequence,
- "B2B" for Board to Board Connector,
- "TS" for Technical Specification
- "VCP" for Variants Currently in Production
- "RH" for Revision History
- name: custom, some fix names, see below
- Fix names:
- "Figure_OV_BD" for Block Diagram
- "Figure_OV_MC" for Main Components
- "Table_OV_IDS" for Initial Delivery State
- "Table_PWR_PC" for Power Consumption
- "Figure_PWR_PD" for Power Distribution
- "Figure_PWR_PS" for Power Sequence
- "Figure_PWR_PM" for Power Monitoring
- "Table_PWR_PR" for Power Rails
- "Table_PWR_BV" for Bank Voltages
- "Table_TS_AMR" for Absolute_Maximum_Ratings
- "Table_TS_ROC" for Recommended_Operating_Conditions
- "Figure_TS_PD" for Physical_Dimensions
- "Table_VCP_SO" for TE_Shop_Overview
- "Table_RH_HRH" for Hardware_Revision_History
- "Figure_RH_HRN" for Hardware_Revision_Number
- "Table_RH_DCH" for Document_Change_History
- Use Anchor in the document: add link macro and add "#<anchorname>
- Refer to Anchror from external : <page url>#<pagename without space characters>-<anchorname>
|
----------------------------------------------------------------------- |
Note for Download Link of the Scroll ignore macro: |
Table of Contents |
Overview
The Trenz Electronic TEBA0714 is a carrier for Trenz Electronic module TE0714 which is an industrial grade module integrated with Xilinx Artix 7.
Refer to http://trenz.org/teba0714-info for the current online version of this manual and other available documentation.
Notes :- short description of the PCB
- Short Link of the wiki resources reference:
|
Key Features
Note: 'description: Important components and connector or other Features of the module → please sort and indicate assembly optionsKey Features' must be split into 6 main groups:- FPGA/Module
- Package:
- Speed:
- Temperature:
- RAM/Storage
- On Board
- Interface
- E.g. ETH, USB, B2B, Display port
- Power
- E.g. Input supply voltage
- Dimension
|
- Module:
- Trenz TE0714 Module
- Temperature: -40 to +85 °C
- On Board:
- 2 x User LEDs (Red, Green)
- 1 x DONE LED (Red)
- Interface:
- 2 x Pin Header 50 Pol. (FPGA Bank I/Os and Power)
- 2x Samtec 100 Pin LSHM Series Connectors
- 1 x XMOD JTAG/UART Adapter (TE0790)
- 1 x Pin Header 16 Pol. (JTAG, MGT-CLK, Boot Mode, XADC, I/O's)
- 1 x Pin Header 10 Pol. (FPGA Bank I/Os and Power)
- 1 x SFP+ Connectors
- Power:
- Dimension: 46 mm × 75 mm
Block Diagram
Main Components
Notes :- Picture of the PCB (top and bottom side) with labels of important components
- Add List below
|
- SMT pin header, J26
- SMT pin header, J27
- Board to Board (B2B) Connector, JM1
- Board to Board (B2B) Connectorr, JM2
- XMOD header, JX1
- Voltage Regulator, U1
- User Red LED, D2
- User Green LED, D1 (Red)
- SFP+ Connector, J1
- User Red LED, D3
- 50-pin header solder pad, J20
- 16-pin header solder pad, J3,
- 10-pin header solder pad, J4
- 50-pin header solder pad, J17
Initial Delivery State
Notes :Only components like EEPROM, QSPI flash and DDR3 can be initialized by default at manufacture.If there is no components which might have initial data ( possible on carrier) you must keep the table empty |
- Pin headers (not soldered to the board, but included in the package as separate component)
Storage device name | Content | Notes |
---|
--- | --- | --- |
|
Configuration Signals
- Overview of Boot Mode, Reset, Enables.
|
Signal | MODE Signal State | Boot Mode | Note |
---|
BOOTMODE | 0 | Slave SelectMAP |
| 1 | Master SPI |
|
|
Signal | B2B | Signal State | Note |
---|
PROG_B | JM1-94 | Active Low | Clear FPGA configuration vand initiate a new configuration |
|
Signals, Interfaces and Pins
Notes :- For carrier or stand-alone boards use subsection for every connector type (add designator on description, not on the subsection title), for example:
- For modules which needs carrier use only classes and refer to B2B connector if more than one is used, for example
|
Board to Board (B2B) I/Os
FPGA bank number and number of I/O signals connected to the B2B connector:
B2B Connector | Interface | Number of I/O | Notes |
---|
JM1
| User I/O | 52 Single ended, 27 Differential | - | MGT lanes | 4 Differential, 2 lanes |
| MGT reference clock input | 2 Single ended, 1 Differential |
| JTAG | 4 Single ended |
| SoM control signals | 2 Single ended | 'PROG_B', 'DONE' | JM2 | User I/O | 36 Single ended or 18 differential | - | SFP+ Interface control signals | 8 Single ended |
| QSPI interface | 6 Single ended |
| UART interface | 2 Single ended |
| User LEDs | 2 Single ended | Red, Green | SoM control signals | 1 Single ended | 'BOOTMODE' |
|
On-board Pin Header
Pin Header | Interface | Number of I/O | Notes |
---|
J17
| User I/O | 36 Single ended, 18 Differential | Module FPGA Bank 14 | SPI interface | 6 Single ended | - | Power | 4 Single ended | 3.3V, V_CFG | J20 | User I/O | 42 Single ended or 21 differential | Module FPGA Bank 34 | Power | 4 Single ended | 3.3V, V_CFG | User LEDs | 2 Single ended | Red, Green | SoM control signals | 1 Single ended | 'BOOTMODE' | J3 | JTAG | 4 Single ended |
| UART | 2 Single ended | B14_L25, B14_L0 | ADC | 2 Single ended |
| Clock | 2 Single ended, 1 Differential |
| Power | 4 Single ended | 3.3V, V_CFG | Control Signals | 2 Single ended | BOOTMODE, PROG_B | J4 | User I/O | 6 Single ended or 3 differential |
| Power | 2 Single ended | 3.3V, 3.3V_OUT |
|
JTAG Interface Base
JTAG access to the mounted SoM is provided through B2B connector JM1 and JM2 and is also routed to the XMOD JTAG/UART header JX1.
XMOD Header Pin | B2B Connector | Connected to | Note |
---|
A | JM2-97 | B14_L25 | UART Transfer | B | JM2-99 | B14_L0 | UART Receive | E | JM2-100 | BOOTMODE |
| G | JM1-94 | PROG_B |
| C | JM1-90 | TCK |
| D | JM1-86 | TDI |
| F | JM1-88 | TDO |
| H | JM1-92 | TMS |
| 3.3V | JM1-97,99 | 3.3V |
| VIO | JM2-53 | V_CFG |
|
|
SFP+ Connector
Pin | Connected to | Notes |
---|
VCCR | 3.3V |
| VCCT | 3.3V |
| VREF | GND |
| TD+/TD- | MGT TX | MGT Lane | RD+/RD- | MGT RX | MGT Lane | TX/FAULT | SFP0_TX_FAUL | SFP_CTRL | TX/DISABLE | SFP0_TX_DIS | SFP_CTRL | MOD-DEF2 | SFP0_SDA | SFP_CTRL | MOD-DEF1 | SFP0_SCL | SFP_CTRL | MOD-DEF0 | SFP0_MT_DEF0 | SFP_CTRL | RS0/RS1 | SFP0_RS0_1 | SFP_CTRL | LOS | SFP0_LOS | SFP_CTRL |
|
SMT Pin Header
There are two SMT Pin Headers, J26-J27.
J26 is available to choose voltage level for VCCIO34 (FPGA Bank 34) and J27 is provided to set the voltage level for V_CFG (Configuration Voltage). In order to set the voltage level, you should connect it to the corresponding pin with the target value voltage.
SMT Pin Header | VCCIO/VCC | Voltage Level | Notes |
---|
J26 | VCCIO34
| 1.8V |
| 2.5V |
| 3.3V_OUT |
| J27 | V_CFG
| 1.8V |
| V_CFG0 |
| 3.3V_OUT |
|
|
On-board Peripherals
Notes :- add subsection for every component which is important for design, for example:
- Two 100 Mbit Ethernet Transciever PHY
- USB PHY
- Programmable Clock Generator
- Oscillators
- eMMCs
- RTC
- FTDI
- ...
- DIP-Switches
- Buttons
- LEDs
|
Notes :In the on-board peripheral table "chip/Interface" must be linked to the corresponding chapter or subsection |
Chip/Interface | Designator | Notes |
---|
LEDs | D1...3 |
|
|
LEDs
Designator | Color | Connected to | Active Level | Note |
---|
D1 | Green | GLED | Active Low |
| D2 | Red | RLED | Active High |
| D3 | Red | DONE | Active High |
|
|
Power and Power-On Sequence
In 'Power and Power-on Sequence' section there are three important digrams which must be drawn:- Power on-sequence
- Power distribution
- Voltage monitoring circuit
|
Power Supply
Power supply with minimum current capability of 3A for system startup is recommended.
The on-board voltages of the carrier board will be powered up with an external power-supply with nominal voltage of 3.3V.
Power Consumption
Power Input Pin | Typical Current |
---|
VIN | 3.3V |
|
* TBD - To Be Determined
Power Distribution Dependencies
Power-On Sequence
There is no specific power-on sequence, after power up the module and carrier will be powered on.
Power Rails
Power Rail Name | B2B Connector JM1 Pin | B2B Connector JM2 Pin | Direction | Notes |
---|
3.3V | 99,97 | - | Input |
| 1.8V | - | 18 | Input |
| 3.3V_OUT | 83 | 54 | Output | Comes from Module | VCCIO34 | 61 | - | Input |
| V_CFG0 | 53 | - | Input |
|
|
Board to Board Connectors
- This section is optional and only for modules.
- use "include page" macro and link to the general B2B connector page of the module series,For example: 6 x 6 SoM LSHM B2B Connectors
|
TEBA0714 carrier use two Samtec Razor Beam LSHM Connectors on the bottom side.
Technical Specifications
Absolute Maximum Ratings
Symbols | Description | Min | Max | Unit |
---|
VIN | Input Supply Voltage | -0.3 | 6 | V | T_STR | Storage Temperature | -40 | 85 | °C |
|
Recommended Operating Conditions
Operating temperature range depends also on customer design and cooling solution. Please contact us for options.
Parameter | Min | Max | Units | Reference Document |
---|
VIN | 3.135 | 3.465 | V | 3.3V Nominal Power Supply | T_OPR | -40 | 85 | °C |
|
|
Physical Dimensions
- Module size: 46 mm × 75 mm. Please download the assembly diagram for exact numbers.
- Mating height with standard connectors: 8 mm.
PCB thickness: 1.64 mm.
Currently Offered Variants
Revision History
Hardware Revision History
Date | Revision | Changes | Documentation Link |
---|
2016-06-15 | 01 | Initial Release | REV01 |
|
Hardware revision number can be found on the PCB board together with the module model number separated by the dash.
Document Change History
- Note this list must be only updated, if the document is online on public doc!
- It's semi automatically, so do following
- Add new row below first
- Copy "Page Information Macro(date)" Macro-Preview, Metadata Version number, Author Name and description to the empty row. Important Revision number must be the same as the Wiki document revision number Update Metadata = "Page Information Macro (current-version)" Preview+1 and add Author and change description. --> this point is will be deleted on newer pdf export template
- Metadata is only used of compatibility of older exports
|
Date | Revision | Contributor | Description |
---|
| | | | -- | all | | |
|
Disclaimer