<!--
Template Revision 1.64
(HTML comments will be not displayed in the document, no need to remove them. For Template/Skeleton changes, increase Template Revision number. So we can check faster, if the TRM style is up to date).
-->

<!--
General Notes:
If some section is CPLD firmware dependent, make a note and if available link to the CPLD firmware description. It's in the TE shop download area in the corresponding module -> revision -> firmware folder.
-->

<!--
General Notes:
Designate all graphics and pictures with a number and a description. For example "Figure 1: TE07xx-xx Block Diagram" or "Table 1: Initial delivery state". "Figure x" and "Table x" have to be formatted to bold.  
-->

Overview

https://wiki.trenz-electronic.de/display/PD/TEI0005+TRM for the current online version of this manual and other available documentation.

Arrow USB Programmer2 SMD module is a FT2232H based JTAG programmer supported by Intel Quartus. It's designed as Surface-mount module and have to be fitted on the target board in Surface Mount Technology. Furthermore, there is also an UART interface available and two I/O-pins reserved for future use.

Key Features

• Supported by Intel Quartus (JTAG Mode only)
• Designed as Surface-mount module
• Compatible to SMT Pick and Place Assembly Process
• Delivery Option in Standard JEDEC Tray
• 17 x 17 mm
• Based on FTDI FT2232H USB2 Interface
• Additional UART channel available
• Activity LEDs

Block Diagram

Figure 1: TEI0005-01 Block Diagram.

Signals, Interfaces and Pins

Module Pinout

Mechanical drawing below shows the positions of the signal pins on the PCB of the module labeled with designators J1 ... J24. Followed by pin description table.

Figure 2: JTAG Module mechanical drawing (Top View).

Table 1: JTAG module pin assignment.

USB Interface

The USB interface is provided by the FTDI FT2232H IC. The entire USB protocol is handled on chip and compatible to USB 2.0 High Speed (480 MBps) and Full Speed (12 MBps).

On-board Peripherals

FTDI FT2232H IC

FTDI FT2232H IC is used in MPPSE Mode for JTAG, Channel B is available as UART. FT2232H EEPROM is programmed with Arrow Programmer2 Identificator to be recognized by the support library for Quartus.

On-board LEDs

On-board LEDs indicating UART and JTAG activity:

Table 2: On-board LEDs.

Power

Power supply of the adapter board

Arrow Programmer2 is powered via USB.

Technical Specifications

Absolute Maximum Ratings

Table 3: Absolute maximum ratings.

Recommended Operating Conditions

Table 4: Recommended operating conditions.

Operating Temperature Range

Industrial grade: -40°C to +85°C.

Arrow Programmer2 can be used within industrial temperature range.

Physical Dimensions

• Module size: 17.0mm × 17.0mm.  Please download the assembly diagram for exact numbers.

• PCB thickness: ca. 1.2mm
• Highest part on the PCB is 1mm, the overall hight of the module is up to 2.4mm max.

All dimensions are given in millimeters.

Figure 3: Physical dimensions drawing.

Revision History

Hardware Revision History

Table 5: Hardware revision history.

Document Change History

<!--
Generate new entry:
1.add new row below first
2.Copy "Page Information Macro(date)" Macro-Preview, Metadata Version number, Author Name and description to the empty row. Important Revision number must be the same as the Wiki document revision number
3.Update Metadata = "Page Information Macro (current-version)" Preview+1 and add Author and change description.
  -->

Date	Revision	Contributors	Description
		John Hartfiel	update "Recommended Operating condition"
2018-01-12	v.12	John Hartfiel	updated physical dimensions
2017-11-24	v.11	Ali Naseri	updated physical dimensions
2017-11-23	v.10	Ali Naseri	First TRM release

Table 6: Document change history.

Disclaimer

02 Sept 2017