Template Revision 1.0 - on construction

For carrier - module combination, create main getting started page for carrier Design Name always "TE Series Name" +Getting Started, for example "TE0701 Getting started" and add carrier/module combination in the description → link on the module resource page also

For whole board,  use the board name, for example "TEBF0911 Getting Started"


In this section you must explain how to power on the board and run the Reference Design (test board) on the particular module. The main points must be mentioned are:

  • Overview of the board (point out the LEDs, Ethernets, Switches and etc on the board overview)
  • Explain Switches functionality
  • Explain user LEDs

  • Explain the UART connection

  • Refer to the Reference Design

    For more information regarding how to draw a diagram, Please refer to "Diagram Drawing Guidline" .



Table of Contents

TExxxx with TExxxx

Overview






Power supply

The input power supply must be mentioned.

Single ??V power supply with minimum current capability of ??A is recommended to power on the board. 

DIP-Switches and Push Buttons

Explain all DIP switches functionality.

There is a switch (S??) which is connected to RESET signal, it resets the system entirely.

Signal

DesignatorB2BActive Level






There is no DIPs on TExxxx. In case of TE0790 (XMOD) usage, see DIPs mode.

Jumpers

Explain all Jumpers functionality and connection.


DesignatorConnected toB2BNote

Boot_R
Open:
Short:


LEDs

Explain all user LEDs functionality and connections.

There are three user LEDs which can be used for variant purposes.

DesignatorColorConnected toB2BActive LevelNote




















DesignatorColorConnected toActive LevelNote












DesignatorColorConnected toActive LevelNote











JTAG/UART

Explain JTAG or UART connection breifly.

JTAG and UART connections are available through mini USB connector.

Designator

Connected to

B2B Pin

XMOD Header JB?DirectionNote













Reference Designs

In this Section you must refer to the Reference Design (Test board) for the particular module.

For Example: TE0728 Reference Designs

Notes

In this Section you must refer to the Resources Page for the particular module.

For Example: TE0728 Resources