EN:
Before mounting the KK0807-02, apply at least approx. 2mm GapFiller to the following areas:
The LED D1 must remain free and must not be covered by GapFiller.DE:
Vor der Montage des KK0807-02 wird auf folgende Stellen mindestens ca. 2mm GapFiller aufgetragen:
Die Leuchtdiode D1 muss frei bleiben und darf nicht von GapFiller verdeckt werden.- EN: Align KK0807-02 and press on lightly:
DE: KK0807-02 ausrichten und leicht anpressen: - EN:
Set the torque screwdriver at the assembly station to 0.5Nm.
DE: Den Drehmomentschrauber am Montagepaltz auf 0,5Nm einstellen.
Insert the PH1 Philips crosshead bit and fix it crosswise from below with four M3x6mm pan-head screws.
Das PH1 Philips Kreuzschlitzbit einlegen und mit vier M3x6mm Linsenkopfschrauben von unten überkreuz fixieren.
(Beispiel: TE0808)
Overview
Content Tools