Table of contents
CPLD Access
- Module B2B Connector: MAX10 CPLD U46 is available over J2 Pins:
- D56 TCK
- D57 TMS
- D58 TDO
- D59 TDI
- With TEBT0865 Carrier:
- Connect Intel TEI0004 Programmer on J17 over USB with PC
- Power on TEBT0865
- Open Intel Quartus Programmer software and follow General programming instructions below.
Available CPLD Firmware
- TE0865 CPLD - Firmware description
Download
- TE0865/<PCB Revision>/Firmware/
- Use files from the subfolders of your PCB revision
General instructions
MAX 10 Firmware Update - General Requirements
- Quartus Prime software, available for free (lite version) on https://www.intel.de/
- Arrow USB Programmer Driver
- Quartus compatible JTAG programmer, for example:
- TEI0004 - Arrow USB Programmer2 or carrier board with FTDI for JTAG
- Other JTAG Programmer compatible with Quartus Programmer
- JTAG must be connected to FPGA JTAG
- Correct Firmware (*.pof file) from Download area
MAX 10 Firmware Update - General Procedure
Important:
- Connect only one JTAG device to host PC.
- Close all other JTAG programs.
Procedure:
- Enable FPGA JTAG access (see JTAG section on Firmware description)
- Connect JTAG
- Power on system
- Open Quartus Prime
- Open Quartus Programmer from top menu: Tools → Programmer
- Select from Programmer top menu: Edit → Hardware Setup
- Select via the drop down menu: Arrow-USB-Blaster [USB0] (Installation of Arrow USB Programmer needed) and close the window
- Click Add File...
- Select correct Firmware from Download area and press Open
- Click Start to program the device
More information are available on the Firmware description.
Overview
Content Tools