| Company | Trenz Electronic GmbH |
|---|---|
| PCN Number | PCN-20251115 |
| Title | TE0865-02 OPTIGA Trust Authenticator Upgrade |
| Subject | BOM Change |
| Issue Date | 2026-03-02 |
Products Affected
This change affects TE0865 modules of revision TE0865-02 with serial numbers greater than 990475.
Please Note: Assemblies with pre-installed heat spreader still have have the 'module only' serial number as shown below in Method of Identification section.
Affected Product |
|---|
| TE0865-02-* |
Changes
#1 Changed OPTIGA Trust Authenticator (U16) from SLS32AIA010MHUSON10XTMA2 to SLS32AIA010MLUSON10XTMC1.
Type: BOM Change
Reason: EOL of Component.
Impact: Product version changed from V1 to V3. Firmware changed to newest available version C1. Refer to component datasheet for more information.
Method of Identification
Locate OPTIGA Trust Authenticator (U16) on bottom side of the TE0865-02.
| old | new |
|---|---|
SLS32AIA010MHUSON10XTMA2 | SLS32AIA010MLUSON10XTMC1 |
|
|
Production Shipment Schedule
This change takes place with immediate effect. If the new version is not suitable for your application and still former version of the board is needed, please contact us.
Contact Information
If you have any questions related to this PCN, please contact Trenz Electronics Technical Support at
- forum.trenz-electronic.de
- wiki.trenz-electronic.de
- support%trenz-electronic.de (subject = PCN-20251115)
phone
national calls: 05741 3200-0
international calls: 0049 5741 3200-0
Disclaimer
Any projected dates in this PCN are based on the most current product information at the time this PCN is being issued, but they may change due to unforeseen circumstances. For the latest schedule and any other information, please contact your local Trenz Electronic sales office, technical support or local distributor.
This PCN follows JEDEC Standard J-STD-046.
Overview
Content Tools