2015

First year an Xilinx 7 series based product or Zynq based product passed into semifinals for the


HackdaDay prize

Trip To Space


A small step for those on the way to

All Programmable ...

... world?

Table of Contents

Overview

TE0722  Zynq Module is without DDR, special FSBL is needed to startup correctly see, DDR less ZYNQ Design

Power supply

TE0722 need external 3.3V power supply. It is possible but not recommended to supply TE0722 with TE0790 programmer, but only for small designs (max ~300mA over XMOD possible).

If TE0722 is powered via XMOD (max. ~ 300mA), use XMOD DIP-Switch:

POSValue
1ON
2OFF
3ON
4ON

If TE0722 is powered with external 3.3V, use XMOD DIP-Switch:

 POS

Value

1ON
2OFF
3OFF
4OFF


DIP-Switches

There are no DIPs on TE0722. In case of TE0790 (XMOD) usage, see power supply section.

LEDs

Working in process. Will be coming soon.

JTAG/UART

JTAG and UART is possible over J2 connector.

Use XMOD (TE0790) Programmer with special firmware

XMOD Programmer support JTAG and UART over same USB cable.

  • XMOD DIP Switch settings: See power supply section
  • XMOD Firmware: Special XMOD CPLD Firmware is needed, see: TE0790 CPLD Firmware  Firmware (SC-PGM-TE0790-0203_XMOD_DIP40-01_20170426) is available on : TE0790 Download Area/<Revision>/Firmware

Use other JTAG Programmer

With other Programmer only JTAG is possible. UART must be connected separate.

TE0722-J2 PinTE0722-NamePlatform Cable - NamePlatform Cable - Colorexternal power supply
1GND----GND
2GNDGNDblack--
3B34_L4_N(def. UART TX)------
4TCKTCKyellow--
53.3VVREFred--
63.3V----3.3V
7B34_L10_P(def. UART RX)------
8TMSTMSgreen--
9TDITDIwhite--
10TDOTDOviolet--

Reference Designs

Notes

  • No labels