You are viewing an old version of this page. View the current version.
Compare with Current
View Page History
« Previous
Version 2
Next »
A recovery boot (aka TE USB FX2 firmware recovery) is a multi-step boot operation:
- Open a
USB Firmware Upgrade Tool
(double click OpenFutNet.exe
).
- Click OK into the pop-up. (In the next version, it will appears only if Verbose flag is checked).
- Press the “
Select *.iic file or enter file path
” button corresponding to the firmware file pathname selection. - Select a suitable
.iic
firmware upload file. You can download the firmware availbale at Trenz Electronic GitHub.
- Press the “Program USB: write IIC EEPROM” button if you want the *
.iic
file to be written into the large EEPROM of the EZ-USB FX2LP USB FX2 microcontroller. - OpenFutNET informs you, with a pop-up, that a Cypress device has been inserted and not a Trenz Electronic device.
- Move the EEPROM switch to enable the USB EEPROM connection, if it is not already done.
- Click 'Yes' in the pop-up.
- When the progress bar reaches 100%, the following log text message notifies the successful completion of the USB upgrade procedure.