The module has two B2B (board-to-board) receptacle connectors (J4 and J5) for a total of 160 contacts. The figure below shows B2B connectors location on board; USB connector is located on the top side and is shown to define module position.
TE0630 uses high-density shockproof connectors shown in the figure below.
Connector part numbers are listed in the table below.
Supplier | Header |
---|---|
Digikey | H11113CT-NDH11113TR-NDH11113DKR-ND |
Hirose | DF17(3.0)-80DS-0.5V(57) |
Trenz Electronic | 22684 |
The on-board receptacles mate with their corresponding headers on the carrier board shown in the figure below.
Ordering numbers of mating connectors are listed in the table below.
Supplier | Header |
---|---|
Digikey | H11148DKR-NDH11148TR-NDH11148CT-ND |
Hirose | DF17(4.0)-80DP-0.5V(57) |
Trenz Electronic | 22938 |
The figure below shows the definition of stacking height featured by the combination of the TE0630 receptacle with its corresponding header.
The stacking height of the TE0630 B2B connectors is 7 (seven) mm. The stacking height does not include the solder paste thickness.