Two clock oscillators are installed on the TE0630.
Clock oscillator U10 generates a 24 MHz clock signal for the FPGA and the USB controller. This clock signal is used for synchronous communication between FPGA and USB controller.
Clock oscillator U11 generates a 100 MHzOscillator frequency can be changed by user request. Contact Trenz Electronic for details. clock signal used as a main system clock in FPGA designs. See the table below for pin-out information.
Signal | Frequency | FPGA pin |
---|---|---|
24MHZ1 | 24 MHz | G3 |
SYSCLK | 100 MHz | AA12 |